Page 2
Mounting The PDM5 series are supplied with four 3M D Stape standoff which have captive lugs when inserted into the PCB mounting hole. Tactical series powder coated enclosures are fitted with metal 3mm x 8 mm threaded standoffs to suit PDM module and flush mount 3 mm root nuts to mount power modules and are designed to accommodate various SLA batteries check with your supplier.
Page 3
AYOUT Settings Cont. X4 Common Fault Relay PDM5 incorporates an onboard common fault relay (SPDT) which activates when any of the fuses fail NC,CO,NO. Outputs Output terminals 1-10 are fitted default with 1a M205 fuses. Output Terminals 24vac yellow LED indications Voltage Input model dependant 12vdc or 24vdc ac-dc Header shunt 1 &...
Page 4
Specifications : ( In the interests of product improvement, Tactical reserves the right to change specifications without notice) PDM5 Input Voltage 12vdc / 24vac, 24vdc & 48vdc model dependant No: of Outputs LED’s Output Fuse Status Green / 24vac High Voltage Yellow / Common Fault Trip Relay Red Dimensions 111 L x 75 W x 25 H mm Mounting...