Install in standard USB jack
The ET9-USB reader is available in three model variations
• ET9-USB-1 – switchable for internal or external antenna
• ET9-USB-1E – external antenna only; no switch
• ET9-USB-1I –internal antenna only; no switch, no MMCX jack
DIMENSIONS
L x W x H
MOUNTING
MATERIAL
POWER REQUIREMENTS
ISO PROTOCOLS
CARD COMPATIBILITY
STATUS LED
EXTERNAL ANTENNA
(optional)
EMI COMPLIANCE
READ RANGE
Internal Antenna
COMMUNICATIONS PROTOCOL
FREQUENCY
ENVIRONMENTAL
WARRANTY
These Secura Key products are warranted against defects in materials and workmanship for two
years. Secura Key will replace any Secura Key manufactured product that fails to perform as
intended. This warranty does not include freight, taxes, duties, or installation expenses. See www.
securakey.com for complete terms and conditions.
ET9-USB-1 Micro Reader
Installation Instructions
SPECIFICATIONS:
2.7" X 0.9" X 0.4"
(68.58 mm x 22.86 mm x 10.16 mm)
Install in standard USB jack
ABS
USB Port Power
ISO 15693
Secura Key e*Tag
Infineon My-D, My-D Lite
Internally mounted – view through translucent housing
1" x 4" PCB with 11" MMCX cable, 5-6" read range
(25.4mm x 101.6MM PCB with 279.4mm cable,
127 – 152 mm read range)
FCC Part 15-B Class B
2-3" (50-75 mm)
e*Tag® Host
13.56 MHz
Operating Temperature: 32°F to +158° F (0°C to +70°C)
Relative Humidity: 0-95% Non-Condensing
, TI HF-1, Philips I-Code SLI, ST Micro LRI,
®