Advertisement
Quick Links
Specification of KL300-1 KL300-2 KL300-3 KL300-4
Parameter:
Working Voltage：DC12V
Working Current：12mA
Frequency：433.92MHz
Modulation：ASK
Temperature：-20-55℃
Dimension：58*39*14mm
Weight : 32.0g
Encode type: Learning code
Operation Method:
1. Match code:
Hold learning button and learning indicator light blinks, then press any buttons of remote control,
if indicator lights flashes 3 times, match code successfully. Maximum 80 remote controls can be
matched.
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.
3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1→ Toggle
Jumper on S2→ Latched
No Jumper on S1 &S2→ Momentary
Advertisement
Related Manuals for Kelvin Electronics KL300-1
Summary of Contents for Kelvin Electronics KL300-1
- Page 1 Specification of KL300-1 KL300-2 KL300-3 KL300-4 Parameter: Working Voltage：DC12V Working Current：12mA Frequency：433.92MHz Modulation：ASK Temperature：-20-55℃ Dimension：58*39*14mm Weight : 32.0g Encode type: Learning code Operation Method: 1. Match code: Hold learning button and learning indicator light blinks, then press any buttons of remote control, if indicator lights flashes 3 times, match code successfully.
- Page 2 Working Mode: 1. Non-lock/Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others. 2. Self-lock/Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others.
- Page 3 manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.