Page 1
INSTRUCTION BOOK FOR Safety Belt A-552 & A-552R...
Page 2
Installation of Safety Belt 1. Attach the two 3” Velcro loop strips to the top surface of the TV with 2” on top and 1” on the side. See Figure 1. Use the following guidelines to position the strip. Velcro strip to be on a flat surface parallel to the monitor’s base. Velcro strip is the maximum distance from the front of the screen.
Page 3
Figure 3 4. After the belt is in a suitable location for tightening, remove the adhesive protectors from the Velcro hooks and place the belt over them. 5. Tighten the belt. Do not overtighten as this could result in damage to the TV. Secure the loose end of the belt.