Saxby 78962 Instruction Manual

Wiring
Terminal block not included. Installation may require advice from a qualified person. Connect to an approved outdoor rated
terminal block, observing the wiring diagram here.
SUPPLY
NEUTRAL
EARTH
SWITCHED LIVE
Technical data
Supply
220-240 V~, 50 Hz
Voltage:
78962 : 10W LED Module (SMD), 4000K
Bulb
Type:
78964 : 20W LED Module (SMD), 4000K
These products contain a light source of energy efficiency class F.
Non-replaceable light source
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
This product is Class 1, must be connected to earth.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is rated at IP65.
65
IP
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
This light source is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked Shade
For further information, please visit https://www.lighting-info.co.uk/78962
V4 07/01/2022
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
LIGHT FITTING
BLUE (N)
Check that...
• You have correctly identified the wires.
GREEN / YELLOW
• The connections are tight.
BROWN (L)
• No loose strands have been left out of
the connection block.
78966 : 30W LED Module (SMD), 4000K
78968 : 50W LED Module (SMD), 4000K
Non-replaceable control gear
Instruction manual
Surge Floodlight
78962, 78964, 78966, 78968, 78970
www.saxbylighting.com