Page 1
Operating Instructions & Parts Manual MagicLift™ Hydraulic Service Jack Model Capacity 25057 5 Ton 25107 10 Ton This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING AdveRTenCIA •...
SAFETY and GeneRAL InFORMATIOn Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use.
Page 3
Before Use 1. Verify that the product and application are compatible, if in doubt call Omega Technical Service (888) 332-6419. 2. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the product, its components and recognize the hazards associated with its use.
OPeRATIOn MAInTenAnCe Use only Mobil DTE 13M or equivalent Lifting hydraulic jack oil. Improper fluid can cause Only attachments and/or adapters supplied premature failure of the jack and the potential for by the manufacturer shall be used. Lift only sudden and immediate loss of load. on area of the vehicle as specified by the vehicle Adding oil manufacturer.
Page 5
Replacement Parts Illustration for Model 25057 Figure 2 - Replacement Parts Illustration for Model 25057...
Page 6
Replacement Parts Illustration for Model 25107 Figure 3 - Replacement Parts Illustration for Model 25107...
When ordering parts, please give the Model number, part number and parts description. Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. E-Mail: sales@omegalift.com Tel: (888) 332-6419 Fax: (816) 891-6599 Omega Website: http://www.omegalift.com Replacement Parts List for Model 25057 & 25107 Part no.
Jack will lift, but not maintain • Release valve not tightly closed • Ensure release valve tightly closed pressure • Hydraulic unit malfunction • Discontinue use, contact Omega technical service Jack will not lower after unloading • Reservoir overfilled • Drain fluid to proper level •...