Advertisement
Quick Links
PARKER
RESEARCH
CORP
PARKER RESEARCH CORP.
Parker's portable magnetizing
coils are designed for
magnetic particle inspection of
ferrous metal parts. The coils
allow for the use of either dry
powder or wet fluorescent
inspection media and may be
used for demagnetizing
as well.
The coils are molded in a
tough, black polyurethane and
come equipped with a 10'
(3.048 m) power cord including
a foot switch or optional hand
switch. The sealed electrical
connection box has a 2"
(50.8 mm) X 5" (127.00 mm)
flat base allowing the coil to
stand in a vertical position.
The PL-8, PL-10, PL-8PDC, and PL-10PDC operate from a standard 115VAC, 60
Hz single phase grounded power source.
The PL-8S and PL-10S operate from 230VAC 50-60 Hz single phase grounded
power source. The PL-8S and PL-10S are sold without power cord plugs. Only
locally approved plugs should be used and installed by certified personnel.
Using an approved GFCI is recommended.
1.800.544.2843
PORTABLE MAGNETIZING COILS
PL-8
www.calcert.com
15
10
20
5
25
0
30
BULLETIN 277
MARCH 2014
PL-10
sales@calcert.com
Advertisement
Related Manuals for Parker Research Corp PL-10S
Summary of Contents for Parker Research Corp PL-10S
- Page 1 Hz single phase grounded power source. The PL-8S and PL-10S operate from 230VAC 50-60 Hz single phase grounded power source. The PL-8S and PL-10S are sold without power cord plugs. Only locally approved plugs should be used and installed by certified personnel.
- Page 2 For the correct and safe use of this equipment, proper training of operating personnel to required inspection techniques, specifications and safety requirements is necessary, and is the obligation of the user. MAGNETIZING CURRENT Figure 1 PL-10 with Case PARKER RESEARCH CORP. 1.800.544.2843 www.calcert.com sales@calcert.com...