Page 1
J11050-M0 rev 08/07 Mini Jacks Instruction Manual MODELS: J11050, J11055 - 5 Ton Capacity J11100, J11200 - 10 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Contact Rated Capacity of J11050, J11055: 10,000 lb. (5 ton) the manufacturer or distributor of this product for a list of Rated Capacity of J11100: 20,000 lb. (10 ton) factory authorized service centers.
Locate and remove oil filler plug. 2. Fill with oil even with the bottom of the oil filler hole. Reinstall the oil filler plug. Figure 1 - Typical Mini Jack Components (J11050 shown) Changing oil OPERATION For best performance and longest life, replace the complete Use of this device may require special skills and fluid supply at least once per year.
Mini Jacks Service Parts MODELS: J11050 & J11055 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the jack are replacement items, but are illustrated as a...
Mini Jacks Service Parts MODELS: J11050 & J11055 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the jack are replacement items, but are illustrated as a...
Page 6
Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the jack are replacement items, but are illustrated as a J11050-M0 rev 08/07 convenient reference of location and position in the assembly sequence. Parts Illustration (refer to page 7 for parts list) Note: To insure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics authorized replacement parts only.
Page 7
Tel: 888-332-6419 Fax: 816-891-6599 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the jack are replacement items, but are illustrated as a J11050-M0 rev 08/07 convenient reference of location and position in the assembly sequence. Parts List Item Model J11100...
Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.