Page 1
OPERATION MANUAL LMT-1008 Transmitter & LMR-404 Receiver FEATURES: ● Simple installation, easy operation ● 67 million codes, self program. ● 6 memory scene settings, no memory loss. ● Red LED indicator on transmitter. ● 2 built-in operations. Can control main load and RGB at the same time.
Page 2
Connect RGB wires into receiver block terminal RGB, making sure correct colour are fitted into the terminal. Connect main power on. OPERATION : Transmitter LMT-1008 (Refer to Fig. 1) Main “ON” button: Turns on the main load. Main “OFF” button: Turns off the main load.
Page 3
3V CR2032 lithium battery is included ex-factory. When battery voltage is low, transmission is low. Slide down the battery cover and replace a fresh new battery. SPECIFICATION: LMT-1008 Transmitter: 3V CR2032 BATTERY included LMR-404 Receiver: Frequency: 433.92MHz Input: DC 12V Attention: please make sure that LED DC Power Supply has short-circuit / overload protection function, before electrical connection.
Page 4
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.