Dalian CR210 Quick Manual

Open the package, you can find five following cables for your using:

With these cables, you can connect CASE Remote Air with any model of Nikon and Canon camera.
Note: Charge cable is only for power charge, not for data transfer.
Go to Apple App Store (iOS system) or Google play (Android system), search "CASE Remote" (not CASE Air), and install CASE app.

Activate CASE app by using the SSID. The SSID is on the backside of CASE Remote Air. Just input the last 6 digits of SSID. During

the verification, you need to connect your mobile device to Internet (not CASE Remote Air Wi-Fi), so you can access our server.
Set up CASE Remote Air with your camera. Use hot shoe on the CASE Remote Air to mount it on the top of the camera .

Note: the micro USB port should connect to the left side of the camera, as is shown in the left figure. Then connect CASE Re
with the right cable from the 5 provided cables.
mote Air
Turn on CASE Remote Air. Press the button for more than 3 seconds to turn on CASE Remote Air.

more than 3 seconds, CASE Remote Air will be turned off. When the system light is blue and stable, CASE Remote Air will work
functionally.
.
Note: Quick press will not turn on CASE Remote Air, but it can check the battery level. For the power light, green is full,yellow
is medium, red is low. You can refer the right figure for the button and LED lights positions.

Connect CASE Remote Air via CASE Remote Air WiFi. Go to Settings---WiFi, connect with CASE Remote Air local WiFi.The CASE Re
mote Air local WiFi will ask you for SSID and password. The SSID should be start with CASE_R, so input the SSID (on the backside of
the CASE Remote Air)
Start CASE app, now you can enjoy your CASE Remote Air !

If you have more concerns, please refer these two important YouTube video for more detail:
https://www.youtube.com/watch?v=q0oaulCuIWI
https://www.youtube.com/watch?v=ItYaCLjczis
CASE Remote Air Quick Guide
after CASE_R. And you can find the password on the backside of the device.
If you press the button again for
.