Studio Monitor Loudspeakers Operating Instructions...
Page 2
Overview HHB Circle 5 loudspeakers are designed to produce an accurate and highly detailed sound, both on and off axis, making them ideal for use in stereo and surround sound professional monitoring applications. Available in active and passive versions, more than 20 years’...
This is made via a pair of binding posts on the rear of the loudspeaker. Take care to ensure that the positive (red +) terminal on the Circle 5 is connected to the positive (red +) terminal on the amplifier,...
Page 4
Circle 5 Active Audio connection to the active Circle 5 is via a balanced XLR or unbalanced RCA phono. The audio should be connected to either input, not both, with the input switch being set accordingly - pushed in for balanced XLR and out for unbalanced RCA phono.
Both speakers should be the same distance from the listening position. • The Circle 5 speakers should be angled in towards each other, so as to point at the listening position, and placed at a height where the listener’s ears are level with the tweeters.
Page 6
Effect Of The Room On Sound Quality • The Circle 5 loudspeakers should not be placed too close to the wall - less than one metre away (approximately three feet) - as this will augment the bass frequencies. At these low frequencies, the sound from the loudspeakers radiates in all directions, and reflects off any hard surfaces to combine with the direct sound.
This warranty will become void if the product has been misused, modified or tampered with in any way. HHB shall not be liable for any consequential or incidental damages due to the failure of this product.