Advertisement
Quick Links
SZ-KFB01 ZigBee Key Fob Manual / Installation Guide
SZ-KFB01 is a professional security token with built-in authentication mechanisms. Just use the Key Fobs
and users can have security control wherever inside or outside of their homes.
Specification
Frequency
Battery Type
Communication Range
LED Indicator
Operating Temperature
Storage Temperature
Battery Life
Keys
Dimension
Package Contents
2.4GHz 802.15.4 Zigbee system
DC3V CR2032 * 1
Open Air：100M (Max)
Red / Green x 1
0 C to 50 C (32° - 122°F)
-20 C to 70 C (-4° - 158°F)
2 Years
: Arm All
: Disarm All
: Reserved
: Arm Perimeter
56 mm x 38 mm x 16 mm (2.2" x 1.5" x 0.6")
1
Advertisement
Summary of Contents for Securifi SZ-KFB01
- Page 1 SZ-KFB01 ZigBee Key Fob Manual / Installation Guide SZ-KFB01 is a professional security token with built-in authentication mechanisms. Just use the Key Fobs and users can have security control wherever inside or outside of their homes. Specification Frequency 2.4GHz 802.15.4 Zigbee system...
- Page 2 LEDs Power (Red/Green) On (Red) - When any key is pressed. Blinking (Red) - The command is being processed (2 times per second). Blinking (Green): The LED will blink for 10 seconds when join/leave function is being processed. The LED will be on for 2 seconds when join/leave function is succeeded and then off.
- Page 3 4. Install the supplied battery. 5. Put the circuit board back into the device. 6. Tighten the back and the device with the screw. 7. The device is ready to be added to the ZigBee Coordinator.
-
Page 4: Operation
1 second. The LED is flashing while processing. If the SZ-KFB01 has been joined with the ZigBee Coordinator successfully, the Green LED will be on for 2 seconds and then off. The Green LED will be off instantly if failed. -
Page 5: Fcc Statement
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-ence to radio communications.