Genius Traveler 9020BT Quick Start Manual

Download this manual

Hardware Installation

1. Install one AA or AAA battery in the mouse as instructed.

2. Make sure that you have switched on the power switch underneath the mouse.

Mouse Button Assignments

1. Left Button: Provides traditional mouse functions like

click, double click and drag.

2. Magic-Roller: Press the "Magic-Roller" to surf the

Internet and Windows documents.

3. Right Button: Provides traditional mouse click functions.

4. Switch Device Button: Press this button to switch

between PC or tablet device.

Note: Download the programmable driver from our website:

www.geniusnet.com

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk

which is made of glass or mirror.

2. The connection of the wireless device is factory preset,

so when you plug the USB receiver into any USB port,

the connection between the micro receiver and the mouse will be established

automatically.

3. In case your PC did not install the hardware successfully, remove the micro receiver from

the USB port and go Human Interface Devices under Device Manager to remove the

mouse then plug in the micro receiver to a USB port again.

4. If you feel the mouse does not move smooth as usual, it is possible the battery has lost its

charge so you need to replace it. Remember to put the battery in the correct direction.

- 1 -

English

Page 1 English Hardware Installation 1. Install one AA or AAA battery in the mouse as instructed. 2. Make sure that you have switched on the power switch underneath the mouse. Mouse Button Assignments 1. Left Button: Provides traditional mouse functions like click, double click and drag.
Page 2 English FCC : Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 3 English _ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. _ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Gmzl5