2. Keep these instructions — Keep the safety and operating instructions for future reference. 3. Heed all warnings — Follow all warnings on the SW103/SW203/SW303 and in these operating instructions. 4. Follow all instructions — Follow all operating and other instructions.
PANEL TOUR Before setup, you should familiarize yourself with the connections on the back of the SW103 as shown in Drawing 1. 1. POWER INDICATOR. When the amplifier is ON, this indicator will be green. When the amplifier is in the STANDBY mode, this indi- cator will be red.
Page 4
AMPLIFIER PANEL TOUR Before actual setup, you should familiarize yourself with the connections on the back of the SW103/SW203/SW303, as shown in Drawing 2. . POWER INDICATOR. When the amplifier is ON, this indicator will be green. When the amplifier is in the STANDBY mode, as men- tioned in item 2, this indicator will be red.
With tower speakers, side wall or rear placement is also acceptable. 2. Wall outlet. Since the SW103, SW203, and SW303 require AC power, it must be placed within ten feet of a wall outlet. We don’t recommend extending that range...
SUB IN. o 3. Connect your main (and surround DRAWING 4 - Setup for SW103 speakers if applicable) to the receiver according to the receiver’s owner’s manual. o 4. For the SW203 and SW303, set the...
SW203: 30-125 Hz.+/- 3dB variable SW303: 23-180 Hz.+/- 3dB variable Output Normalized 1 meter maximum SPL SW103: 103 dB average from 36 Hz.-100 Hz. SW203: 109 dB average from 34 Hz.-100 Hz. SW303: 112 dB average from 27 Hz.-100 Hz. Dimensions SW103: 15 ˝...