Download Print this page

Chamberlain LiftMaster Professional 98LM Owner's Instructions

Motion detecting door control panel for use with garage door openers manufactured after january 1, 1995
Hide thumbs Also See for LiftMaster Professional 98LM:

Advertisement

Quick Links

NOTE: After installation, the green indicator light behind
the push bar cover will indicate proper connection.
For standard wall mount,
Do not
overtighten.
DO NOT CONNECT TO LIVE ELECTRICAL WIRING. CONNECT ONLY
TO 24 VOLT LOW VOLTAGE WIRES. CONNECTION TO LIVE WIRES
OR HIGHER VOLTAGE MAY CAUSE SERIOUS INJURY FROM SHOCK,
BURN OR ELECTROCUTION.
Children operating or playing with a garage door opener can injure
themselves or others. The garage door could close and cause
serious injury or death.
Install the door control (or any additional push buttons) out of the
reach of children and away from all moving parts of the door and
door hardware, but where the garage door is visible. Do not allow
children to operate the push button(s) or the remote control
transmitter(s).
A moving garage door could injure someone under it. Activate the
opener only when the door is properly adjusted, you can see it
clearly, and there are no obstructions to door travel.
For pre-wired installations,
not overtighten.
NOTE: The automatic light feature will become functional
6-1/2 minutes after power is restored.
KG
KG
Do

Advertisement

loading

Summary of Contents for Chamberlain LiftMaster Professional 98LM

  • Page 1 TO 24 VOLT LOW VOLTAGE WIRES. CONNECTION TO LIVE WIRES OR HIGHER VOLTAGE MAY CAUSE SERIOUS INJURY FROM SHOCK, BURN OR ELECTROCUTION. Children operating or playing with a garage door opener can injure themselves or others. The garage door could close and cause serious injury or death.
  • Page 2 Override Feature, Special note for older garage door openers: Automatic Light To activate: To turn off:...