olympia electronics RF-58 Quick Start Manual

RF-58
PRESENCE INDICATION LED (red and green LED)
TECHNICAL CHARACTERISTICS
Operation voltage
Consumption (Max.)
Degrees of cover protection
Produced in accordance with
Operation temperature
Humidity
Construction material
Dimensions
Weight
Guarantee
Thank you for your trust in our products.
Olympia Electronics - European manufacturer.
DESCRIPTION
The RF-58 is a device that is used to indicate
the presence of a customer in a hotel or rented
room. The device operates in cooperation with
the RF-57 and RF-43 or RF-85, that are
products from our company. With the connection
shown on figure 4, when the room is empty then
the RF-58 emits a green color whereas when
there is someone in the room the unit emits a
red color.
INSTALLATION
The installation of the device can be done on an
interior wall by recess mounting it in an electrical
wall switch box or it can be mounted on a false
ceiling. (Figure1 and 2). The electrical box must
have at least a 4cm depth and screw holes from
mounting the unit.
Figure3 shows the connection of the RF-58 with
the RF-57 and the RF-43/RF-85. In the same
diagram we can also see the suggested cable
cross sections.
Dimensions in σε mm
78 50
Figure 1
Page 1 from 3
220-240V AC/50-60Hz
7 VA
IP20
EN 60598-1, ΕΝ 60598-2-1
0 to 40 °C
Up to 95% relative humidity
Bayblend FR-3010 - polycarbonate (opaque)
78 (diameter) x 50 (height)mm
60 gr
2 years
Install the ring on the electrical box
and fasten it with the supplied screws
Figure 2
After making the connection (figure 4),
place the unit on the electrical box
and lock in into place by rotating towards
the right
RF-58/T
Figure 3
You can order the unit with a gold decorative
ring (Α-82/G) or with a silver decorative ring
(Α-82/SL).
930058000_09_004