Advertisement
Quick Links
Please read the instructions completely before beginning the installation.
Ava Collection
Model Number: 9950CU-TM
Flush both supply lines before installation, then shut off both supply lines.
Minimum hole size for the spout and handle trim is 1-1/4" and maximum of 1-1/2"
HANDLE TRIM INSTALLATION
-Unscrew pre-assembled handle trim from the valve
1
body. Hot valve assembly "Red" to be mounted on
left. Cold valve assembly "Blue" to be mounted on right.
- Remove the top lock nut and the fiber gasket from
2
the valve body.
- Apply a ring of silicone caulking around the handle hole
on deck top.
The measurements shown are for reference only. Products and specifications shown are subject to change without notice.
www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681
Ava Crystal Collection
Model Number: 9950CR-TM
Rev 06/2016
Installation Instruction
AVA COLLECTIONS
Roman Tub Filler
1/6
Advertisement
Related Manuals for Santec Ava 9950CU-TM
Summary of Contents for Santec Ava 9950CU-TM
- Page 1 Rev 06/2016 Installation Instruction AVA COLLECTIONS Roman Tub Filler Please read the instructions completely before beginning the installation. Ava Collection Ava Crystal Collection Model Number: 9950CU-TM Model Number: 9950CR-TM Flush both supply lines before installation, then shut off both supply lines. Minimum hole size for the spout and handle trim is 1-1/4”...
-
Page 2: Spout Installation
-Slip valve body up from below tub deck. Place the top lock nut and the fiber gasket back onto the valve body until the top surface of the lock nut is flush with the top surface of the valve body. - Secure the top lock nut in place before inserting the handle. -
Page 3: Parts Drawing
PARTS DRAWING PART DESCRIPTION PART # Roman Tub Spout Flange PS-5NV00-U-1 Roman Tub Spout Tube PS-5CU00-U-1 Roman Tub Flange PH0013 Roman Tub Handle Lever PH0090 Teflon Washer PM-099 Screw PM-150 Screw PM-439 O-Ring PM-953 Rubber Washer PM-400 RT Base w/ Insert PS-5CU00-U-3 * Please specify the finish when ordering the part. -
Page 4: Specification Sheets
SPECIFICATION SHEETS 2" 10 1 2 " 3 5/8" 7" 2 3 16 " 2 5 16 " The measurements shown are for reference only. Products and specifications shown are subject to change without notice. www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681... - Page 5 Doing so may ruin your faucet finish and/or void the warranty. Thank you for making SANTEC a part of your lifestyle and luxury spa experience. Our products have been created as works of enduring quality and sophisticated design.
- Page 6 SANTEC reserves the product components of the covered product will be repaired, refinished, or replaced at the sole discretion of SANTEC. SANTEC reserves the right to examine any product claimed defective prior to any warranty claim being accepted or processed, at its sole discretion. This warranty gives you specific legal rights and you may have other rights which may vary from state to state.