Advertisement
Quick Links
Please read the instructions completely before beginning the installation.
Monarch I Collection
Model Number: 1150LL-TM
Monarch III Collection
Model Number: 1150FL-TM
Monarch Crystal II Collection
Model Number: 1150LC-TM
Flush both supply lines before installation, then shut off both supply lines.
Minimum hole size for the spout and handle trim is 1-1/4" and maximum of 1-1/2"
HANDLE TRIM INSTALLATION
-Unscrew pre-assembled handle trim from the valve
1
body. Hot valve assembly "Red" to be mounted on
left. Cold valve assembly "Blue" to be mounted on right.
The measurements shown are for reference only. Products and specifications shown are subject to change without notice.
www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681
Monarch II Crystal Collection
Model Number: 1150TT-TM
Monarch Crystal I Collection
Model Number: 1150CD-TM
Rev 06/2016
Installation Instruction
MONARCH COLLECTIONS
Roman Tub Filler
1/6
Advertisement
Related Manuals for Santec Monarch I 1150LL-TM
Summary of Contents for Santec Monarch I 1150LL-TM
- Page 1 Rev 06/2016 Installation Instruction MONARCH COLLECTIONS Roman Tub Filler Please read the instructions completely before beginning the installation. Monarch I Collection Monarch II Crystal Collection Model Number: 1150LL-TM Model Number: 1150TT-TM Monarch III Collection Monarch Crystal I Collection Model Number: 1150FL-TM Model Number: 1150CD-TM Monarch Crystal II Collection Model Number: 1150LC-TM...
-
Page 2: Spout Installation
- Remove the top lock nut and the fiber gasket from the valve body. - Apply a ring of silicone caulking around the handle hole on deck top. -Slip valve body up from below tub deck. Place the top lock nut and the fiber gasket back onto the valve body until the top surface of the lock nut is flush with the top surface of the valve body. -
Page 3: Parts Drawing
PARTS DRAWING PART DESCRIPTION PART # PART DESCRIPTION PART # Complete Spout Assembly * PS-5M00S Complete Cold Valve P0492 Complete CD Handle Assembly 00CD Tee Connector P0340 Spout Flange * PH2210 All Thread P0341 Quick Connect Spout Shank & Hardware KQ-5000S Aerator Washer PM-356... -
Page 4: Specification Sheets
SPECIFICATION SHEETS The measurements shown are for reference only. Products and specifications shown are subject to change without notice. www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681... -
Page 5: To Obtain Warranty Service
Doing so may ruin your faucet finish and/or void the warranty. Thank you for making SANTEC a part of your lifestyle and luxury spa experience. Our products have been created as works of enduring quality and sophisticated design. -
Page 6: Lifetime Limited Warranty
SANTEC reserves the product components of the covered product will be repaired, refinished, or replaced at the sole discretion of SANTEC. SANTEC reserves the right to examine any product claimed defective prior to any warranty claim being accepted or processed, at its sole discretion. This warranty gives you specific legal rights and you may have other rights which may vary from state to state.