Advertisement
Quick Links
Fountain Components
Image
Item Description
Genesis II
Fountain -
Water Feature
Genesis II
Fountain -
Pump Cover
Genesis II
Fountain -
Pump Cover
Door
Genesis II
Fountain - Basin
Fountain Information:
• Two people are recommended for the installation of this fountain!
• This fountain holds approximately 6 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #10 Refill Device and LED kit
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPF140 - 140 GPH Pump (6 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-73A
1
FT-73B
1
FT-73BB
1
FT-73C
1
FT-73 Genesis II Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK140 Pump
(use large adapter)
#10 Stopper
Approx. 15" length of 1/2" black
non-kink tubing
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
Wedges
2
2
rev 4/8/2020
Advertisement
Summary of Contents for Campania International Genesis II
- Page 1 FT-73 Genesis II Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 6 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
- Page 2 FT-73 Genesis II Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-73 Genesis II Fountain Assembly Instructions Step 9 - Place the pump cover door (FT-73BB) in the pump access opening of the pump cover. Step 10 - Fill the fountain with water. FT-73BB (2 lbs) 4.5"L x 1.25"W x 3.75"H...
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.