Page 1
Inscrivez le numéro de modèle ici. You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: 3/32" (2.38mm) For easy installation of your Delta faucet you will need: ・To READ ALL the instructions completely before beginning.
Page 2
Install handles (1). Be sure glide ring (2) is properly seated in bottom SHUT OFF WATER SUPPLIES. of handle before installing. Be sure the handle with "H" mark (3) to be installed onto the left and the handle with "C" mark onto the right. Remove old faucet.
Page 3
Install Pop-Up Assembly Apply silicone to underside of flange (1). CONNECT TO WATER SUPPLIES. Remove stopper (1) and flange (2). Insert body (2) into sink. Screw flange onto (HOOK-UPS NOT PROVIDED). Screw nut (3) all the way down. body. Pivot hole (3) must face back of sink. Determine which type of connection you will be Push black gasket (4) down.
Page 4
Maintenance *Install stems (1) correctly for FLUSH SYSTEM/CHECK FOR LEAKS. SHUT OFF WATER SUPPLIES proper handle rotation: Remove aerator (1) and turn faucet handles (2) all the way on. NOTE: Remove handles by hand Note: Turn on hot and cold water supplies (3) and flush water lines for turning handle base counterclockwise.
Page 5
Specify Finish ▲ Especifíque el Acabado Précisez le Fini RP72768▲ Handle Assembly Conjunto de manija RP25620 Montage de la manette Set Screws (2) Tornillo de Ajuste (2) Vis de Calage (2) RP41896 Glide Ring (2) Aro para Deslizar (2) L’anneau de Glissement (2) RP64707▲...
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.