Compatible with two free PCIe 4.0/3.0 x16 slots • Linux Kernel v3.10 or later MacOS Compatibility • Compatible with two free PCIe 4.0/3.0 x16 slots • macOS 10.13 or later For information about motherboard compatibility, please visit the link below: https://highpoint-tech.com/PDF/Compatibility_List/FnL/CRD/PRO/Fn L_CRD7101PB_Compatibility_List_v1.00_21_9_26.pdf...
Page 3
CRD7101PB Kit Content • 2x Pre-Configured AIC Drives • Quick Installation Guide CRD7101PB Hardware Front View Full-Height form factor Aluminum casing with integrated thermal pad Low-Noise Cooling Fan PCIe 3.0 x16 Host Interface...
Page 4
CRD7101PB Hardware Installation Step 1. Carefully unpack the package and take out two pre-configured AIC Drives. Step 2. Power off the motherboard and locate the two PCIe slots (x16). Figure 1 - PCIe x16 slot diagram Note: Please consult your motherboard manual for more information about the system’s PCIe configuration.
Page 5
Figure 2 – Mac Pro Installation diagram Note: Please make sure both AIC Drives are securely installed before powering on the system. A loose connection will prevent the AIC Drive from functioning properly.
Page 6
Series), please visit the HighPoint website at: https://www.fnlnvme.com/ FnL Monitor FnL Monitor is an intuitive, web-based monitoring utility that is available for all major operating system platforms. FnL Monitor’s enables customers to check and track the health of their AIC drives in real time.