Compatible with a free PCIe 4.0/3.0 x16 or PCIe 4.0/3.0 x8 slot • Linux Kernel v3.10 or later • VMware • Proxmox For information about motherboard compatibility, please visit the link below: https://highpoint-tech.com/PDF/Compatibility_List/FnL/BRD/PRO/Fn L_BRD6202APB_Compatibility_List_V1.02_21_9_26.pdf BRD6202APB Kit Content • Pre-Configured BRD6202APB AIC Drive • Quick Installation Guide...
Page 3
BRD6202APB Hardware Front View Fan for NVMe chipset Heat sink for M.2 SSD’s Fan power connector PCIe 3.0 x8 Host Interface...
Page 4
PORT2 SSD LED RAID LED PCIe LED PORT1 SSD LED OOB Port RAID LED: when the BRD6202APB has no RAID, the RAID LED is off. If there is a normal RAID in the BRD6202APB, the RAID LED is green. If the RAID is failed (RAID Status is Disable or Critical), the RAID LED is red.
Page 5
Note: Currently, only USB-C to USB-A cables is supported to connect the drives to another host computer. BRD6202APB Hardware Installation Step 1. Carefully remove the BRD6202APB from the box. Step 2. Power off the motherboard and locate the PCIe slot (x16 or x8). Figure 1 - PCIe x16 slot diagram Note: Please consult your motherboard manual for more information about the system’s PCIe configuration.
Page 6
Series), please visit the HighPoint website at: https://www.fnlnvme.com/ FnL Monitor FnL Monitor is an intuitive, web-based monitoring utility that is available for all major operating system platforms. FnL Monitor’s enables customers to check and track the health of their AIC drives in real time.