Page 2
About the identification Tag: The TagMaster ISO Card UHF RAIN (product number: 225000) is designed to be used with TagMaster Long Range RFID Readers for access control and automatic vehicle identification applications. The ISO Card UHF RAIN is a long–time proven high-end choice for vehicle identification within parking and access control.
Page 3
How to mount the Tag on your windshield: Position of the reader Place the Tag on the windshield, on the same side / as close to the reader as possible. If the reader is placed in a high position, place the Tag in the upper part of the windshield.
Page 4
Distance from the edges The WinFix Classic placeholder must have minimum 1 Inch or 3cm distance from the windshield edges. Tag performance will decrease if the holder is mounted close to metal or another RFID-tag. Clean surface Make sure the surface is clean before applying the WinFix placeholder to the windshield glass...
Page 5
Apply the WinFix holder carefully The ISO Card UHF RAIN can be read in any orientation, but make sure to leave enough room to insert the card in the WinFix placeholder. Insert the card in the holder The ISO Card UHF RAIN can be read in any orientation, but make sure to leave enough room to insert the card in the WinFix placeholder.
Page 6
The Iso Card contains no battery and emits no radio signals, it only reflects a modulated response to a reader request. Due to TagMaster’s continuous effort to develop the products in response to customer needs, the above specifications are subject to change.