Simple BluJax Instruction Manual

INSTRUCTION MANUAL
BluJax - ISBT32 Rev B
NOTE: Make sure you are parked in a safe spot before installation
and whenever you are pairing your device. NEVER WHILE DRIVING
1. Charge
a. Charge your BluJax using the USB charging cable included.
b. When connected to a USB power source, BT icon will glow
red while charging. When charging is complete, red LED light
will turn off.
2. Initial Pairing
a. After charging your BluJax, unplug it from the USB cable.
b. Enable your Bluetooth function on your smart device.
c. Turn on BluJax by pushing and holding the Bluetooth button for 3
seconds. BT icon will be blinking red and blue. Power is on.
d. Open the Bluetooth menu on your smartphone, and scan for
available Bluetooth accessories.
e. Choose "ISBT32R" from the list, and select "Connect".
f. When a successful connection has been established, LED light will
.
change to a solid blue light.
TO PAIR ADDITIONAL DEVICES: Turn off Bluetooth on your first device
and repeat steps b-f. NOTE: You can store up to 5 devices in the
BluJax memory, but BluJax can only play two devices in tandem at
the same time.
4. Day to Day Operation
Press "PLAY" button to play
Press "PAUSE" button to pause
Press "FORWARD" button to skip track
Press "BACK" button to go back to beginning of track
Double click to go back to previous track
Turning Off Your BluJax
To save battery life while not in use, press the control button
for 3 seconds to turn off BluJax.
LED Indicator Guide
Paring mode: Flashing red and blue lights
Paired: Steady blue light
Low Battery: Flashing red light
Charging: Steady red light
Full battery: No light
Here is what you get
Control Button
.
BluJ ax 3.5mm Extension Cable
Cha rge
Power
Pa ir
Plug into AUX
Push to Play
USB Charging Cable
NE NEW W NEW