Assembly Guide SRD-800 series Assembly components: Frame top SRD-800 Jamper SRD-800 Frame bottom SRD-800 Vertical profile U12 Rack Pillar SRD-800 Cable channel U12 Side panel Screw M6x16 DIN 912 Glass door Leg M10x30 Blind door Hex key 5 mm - 1 pcs www.mnmounting.com...
Page 4
Assembly Guide SRD-800 series Assembly Instructions: 1. Start the assembly by installing 1.1. Optional!!! Install a Wheels Set 50 legs ( ) into bottom frame ( instead of legs. 3. Install the top frame ( ) onto 2. Install pillars (...
Page 5
Assembly Guide SRD-800 series 4. Tighten the screws ( 5. Install Jampers ( ) of all ) from the pillars ( inside frames. 6. Install Vertical profiles ( 7. Install Cable channels ( ) from ) from the inside frames.
Assembly Guide SRD-800 series 8. Install the doors ( 9. Install the side panels ( SAFETY INSTRUCTIONS 1. Entrust mounting equipment only to experienced professionals and strictly follow the providedv safety instructions. Improperly installed equipment may result in property damage, personal injury and/or liability for the installing contractor.