Clas Ohlson Airbed CL22289V21 Quick Start Manual

Airbed
Art.no 31-3225-3 Model CL22289V21
31-3225-4 CL22290V21
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event of technical problems or
other queries, please contact our Customer Services.
Safety
This product is intended for indoor use only.
Warning:
• Do not expose the electric pump to moisture.
• Never immerse the product, the mains lead or plug in water or other liquid.
• The product must only be plugged into to an earthed 230 V, 50 Hz power outlet.
• Unplug the pump from the mains when it is not in use.
• Never plug in or unplug the product with wet hands.
• Never use the product if it, the mains lead or plug is damaged or malfunctioning.
• Do not place the mains lead where it can be damaged by hot surfaces, sharp
edges or be crushed.
• Inspect the mains lead regularly for signs of damage. Never use the product if
the mains lead or plug is damaged.
• It is not recommended that the product be used with an extension lead or
trailing socket.
• Never use the product in conjunction with a timer or other timer-controlled equipment.
• The product may be used by children aged 8 or over under adult supervision.
The product may be used by persons with reduced physical, sensory or mental
capabilities or persons with a lack of experience or knowledge which could
jeopardise their safety, provided they have been instructed in the safe operation of
the product and understand the hazards involved.
• Never let children play with the product.
• Use, cleaning and maintenance may be carried out by children but only under
adult supervision.
• The airbed is not a toy. Do not stand or jump on it.
• Keep the storage bag of the product in a cool, dry place out of children's reach
when not in use.
• Never use the product if it has been damaged in any way.
• Never try to open the product, repair, dismantle or modify it in any way.
• Repairs must only be carried out by qualified service technicians and only using
original spare parts.
• Do not use hot air to fill the airbed, doing so might cause the airbed to melt.
• The air intake/outlet of the product must not be covered in any way. Make sure
that no foreign objects block or enter into the air inlet/outlet. Blockages can lead
to fires, electric shocks or damage to the product.
• Never hold the air inlet/outlet next to your eyes or hair when the pump is running.
Important
• Never run the pump for longer than 5 minutes at a time. Let the motor cool down
for 20 minutes before using it again.
• Do not expose the product to direct sunlight for prolonged periods.
• Keep pets away from the product.
• Always place the product on a firm and flat surface.
United Kingdom • www.clasohlson.co.uk
• Avoid placing the product:
- On sharp edges.
- Close to naked flames, heaters or other hot objects.
- Close to doors and stairs.
- In the rain or close to water.
• The airbed is not a buoyancy aid. Do not use it on the water.
• The airbed is not a lifebuoy or life-saving device.
Product description
Airbed with built-in electric pump for speedy inflation and deflation.
Highly comfortable bed with flocked top. Phthalate-free.
Inflating the airbed
1. Plug the mains lead into a wall socket.
2. Turn the control knob to [ INFLATE ].
3. When the airbed is firm but not hard,
stop the pump by turning the control
knob to [ OFF ].
4. Unplug the pump.
Note: The airbed might lose some of its firmness after it has been inflated because
the air being pumped in becomes warm as it is pumped. Once the air has cooled
down it loses some of its volume. The PVC can also stretch a little as the airbed is
inflated, which can also contribute to the airbed losing some of its firmness a while
after inflation.
Deflating the airbed
1. Plug the mains lead into a wall socket.
2. Turn the control knob to [ DEFLATE ].
3. When the airbed has deflated, stop
the pump by turning the control knob
to [ OFF ].
4. Unplug the pump and return the lead
to it storage compartment.
Manual bed inflation
It is possible to inflate the airbed manually if there is no wall socket available.
1. Remove the cap from the air valve.
2. Connect a hand pump to the air valve. Don't use a compressor or other
mechanical pump.
3. Inflate the bed manually.
4. When the airbed is fully inflated, disconnect the hand pump and put the cap back
on the air valve.
Care and maintenance
Note: If the airbed is used permanently with some kind of mattress topper, it should be
aired regularly. Otherwise moisture can develop between the airbed and the mattress
topper, which in time can lead to mould.
• Clean the product by wiping it with a damp cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• Make sure that the airbed is dry before folding it up for storage.
• Expel all the air out of the airbed and place it in the storage bag in a dry,
indoor location.
• Do not store the airbed where it could be exposed to extreme temperatures.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout the entire EU.
In order to prevent any harm to the environment or health hazards
caused by incorrect waste disposal, the product must be handed in
for recycling so that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that
the product is disposed of in an environmentally sound manner.
Specifications
220–240 V, 50 Hz
Power supply
Power 140 W
Size
31-3225-3 203 × 157 × 40 cm
31-3225-4 203 × 97 × 40 cm
English