Hatteland HD 12BRD SX1-A1 Manual

Mounting Bracket, Table / Desktop / Ceiling - 12",15",17",19"
Procedure suitable for: Display (MMD/STD) and Panel Computer (MMC) Series X product ranges.
Two versions of bracket exists, please review the table below to identify your unit model and bracket type. Brackets
that are currently sold/delivered are marked with
of bracket) are shown in red
unit's mounting holes (key hole) that exist with either "single key hole" or "double key hole".
Bracket Arms are clearly marked with Typenumber label so you can identify which version you have (BRD or TMB).
Note: If you ordered a unit with mounting bracket from factory, the corresponding matching bracket has been already
been chosen to ensure correct fi tting. If you order brackets separately at a later date, you should study the table
below carefully as well as review the type of key hole your Display or Panel Computer units has. If unsure, please
contact Hatteland Display for support in choosing the correct bracket version (BRD or TMB).
Table last updated 09 Feb 2015. Throughout 2015 the BRD (HW00) versions will be phased out of production and
only TMB (HW01) versions will remain available for manufactured units.
Typenumber Illustration
HD 12BRD SX1-A1
HD 15BRD SX1-A1
HD 17BRD SX1-A1
HD 19BRD SX1-A1
green
color. The two bracket types exists due to slight variation in manufacturing regarding the
Fits unit model
HD 12T21 MMD-xxx-Fxxx
HD 12T21 STD-xxx-Fxxx
HD 12T21 MMC-xxx-xxxx
HD 15T21 MMD-xxx-Fxxx
HD 15T21 STD-xxx-Fxxx
HD 15T21 MMC-xxx-xxxx
HD 17T21 MMD-xxx-Fxxx
HD 17T21 STD-xxx-Fxxx
HD 17T21 MxC-xxx-xxxx
HD 19T21 MMD-xxx-Fxxx
HD 19T21 STD-xxx-Fxxx
HD 19T21 MxC-xxx-xxxx
Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
color. Those which are obsolete (and replaced by newer type
Notes
"HW blank" and "HW00":
Sold since 2014. Fits Single Key Hole
Chassis only. Will be replaced by
"HW01", when HW00 is out of stock.
"HW01":
For Double Key Hole Chassis, use
HD TMB SX1-A1 (see next page).
"HW blank" and "HW00":
Sold since January 2013, fi ts only Single
Key Hole Chassis. Will be replaced by
"HW01", when HW00 is out of stock.
"HW01":
For Double Key Hole Chassis, use
HD TMB SX1-A1 (see next page).
"HW blank" and "HW00":
Sold since June 2012, fi ts only Single
Key Hole Chassis. Obsolete, replaced by
"HW01".
"HW01":
For Double Key Hole Chassis, use
HD TMB SX1-B1 (see next page).
"HW blank" and "HW00":
Sold since March 2012, fi ts only Single
Key Hole Chassis. Obsolete, replaced by
"HW01".
"HW01":
For Double Key Hole Chassis, use
HD TMB SX1-B1 (see next page).
IND100148-7 - Rev 06 - 16 Feb 2015 - Created by: 363
Page 1 of 7
Status