DAVIS PANTHERA PTG Series Installation Instruction

PANTHERA (PTG) SERIES
Storage:
Prior to installation products are to be stored in cool and dry conditions.
Application:
The installation application and orientation of the product is designed in accordance with the nominated product IP rating,
class designation. Installation environments outside these conditions are not recommended.
Cautions:
•
Electronic control equipment must not be subjected to high voltages, DO NOT MEGGER between Live and Neutral.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or his service agent or a similar qualified person in order to avoid hazard.
• Terminal block not included. Installation must be performed by a qualified person.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or similar
qualified person.
• All cable/conduit terminations must be installed in accordance with the designated IP rating of this product.
•
Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when
subjected to vibration and or movement.
• This luminaire cannot be disassembled by non-professional.
• This luminaire must be installed by qualified electrician in accordance with local rules and codes.
• This luminaire is not suitable for covering with thermally insulating material.
Dimensions (mm)
Installation Instruction
•
Read all instructions to prevent injury, electric shock or damage due to fire or
mechanical hazards.
•
See product label for supply specifications.
• Weight range (min-max): 7.0kg (PTG15) - 7.6kg (PTG100)
Mounting Height & Wind Rating
Recommended
Model
Mounting Height (m)
PTG15 3-8
PTG20 3-8
PTG30 3-8
PTG40 3-8
PTG50 3-8
PTG60 3-8
PTG70 6-12
PTG75 6-12
PTG100 6-12
Wind
Rating (m/s)
57
57
57
57
57
57
57
57
57