Casio DQ-584 Operation Manual

MA0507-EA

ILLUSTRATION

• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Alarm Off
PM indicator Current temperature
Current time Date
(Hour, minutes) (month – day)

GENERAL GUIDE

1 1 1 1 1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about three seconds.
• Pressing this button while the alarm is sounding stops the alarm.
2 2 2 2 2 12 • 24 HR (YEAR) button
• Press this button to toggle between 12-hour and 24-hour timekeeping.
• Pressing this button while "CALENDAR" is selected by the Mode switch 5 advances the year setting.
3 3 3 3 3 MIN (DATE) button
• Pressing this button while "TM" is selected by the Mode switch 5 advances the minute setting.
• Pressing this button while "CALENDAR" is selected by the Mode switch 5 advances the day setting.
Operation Guide DQ-584/584B
Snooze Alarm On HR (MONTH) or MIN (DATE)
button depressed
Snooze on indicator Alarm indicator
Alarm on indicator Alarm time
4 4 4 4 4 HR (MONTH) button
• Pressing this button while "TM" is selected by the Mode switch 5 advances the hour setting.
• Pressing this button while "CALENDAR" is selected by the Mode switch 5 advances the month setting.
5 5 5 5 5 Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
6 6 6 6 6 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
° °
7 7 7 7 7 C/ F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
8 8 8 8 8 Battery

SETTING THE CLOCK

1. Slide the Mode switch 5 to
Press to advance the
"TM". This causes the current
hour setting.
time to flash on the display.
2. Use the 12 • 24 HR (YEAR)
button 2, MIN (DATE) button
3, and HR (MONTH) button 4
to set the time. Holding down
the MIN (DATE) button 3 or
HR (MONTH) button 4
changes the corresponding
setting at high speed.
• Make sure you set the correct
am/pm time if you are using 12-
PM indicator
hour timekeeping. The PM
indicator indicates PM times,
while nothing is indicated for AM
Hour
times.
• The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the Mode switch 5 to
Press to advance the
"CALENDAR". This causes the
month setting.
current date to flash on the
display.
4. Use the 12 • 24 HR (YEAR)
button 2, MIN (DATE) button
3, and HR (MONTH) button 4
to set the date. Holding down
any button advances the
corresponding setting at high
speed.
• You can set the year in the range
of 1990 to 2030.
Year
Month
5. Slide the Mode switch 5 to "NORMAL". This will
cause the figures on the display to stop flashing.
Press to advance the Press to toggle between
minute setting. 12-hour and 24-hour
timekeeping.
Minutes
Press to advance the Press to advance the
day setting. year setting.
Day
1