Solar 2-PRO User Manual

Materials in Package
01 : Solar flood light ( 1pc ) 02 : Solar Panel ( 1pc )
05 : 4.5m Adaptor cable (1pc) 06 : 2 Brackets + 4 M4*10 screws 0 7 : AAA Battery ( 2pcs )
BEFORE USE
1 2
Press and hold the button Press the light button ON.
MATCH , be ready to pair and then the light will
the light and remote blink once. then matching
COMMON TROUBLESHOOT
PROBLEM POSITION
Switch is off
Light is off
No direct sun
Much cloudy or rainy days
Debris on solar panel
Installation location
Short working time Cloudy or very rainy
Battery life is expried
Remote setting is wrong
REMARK
1. Set lighting mode FIRST, THEN set lighting times as (4h, 6h or 12 hours), otherwise, time will not be activated.
2. Motion sensor will be not functional when you set the different brightness level (25%, 50%, 75% or 100%) .
3. The two motion sensor programs are default set and cannot be changed. but the lighting time can be changed as 4H 6H and 12H
4. The light will blink twice when it receives the signal successfully from the remote.
03 : Remote control ( 1pc ) 04 : Expansion screw ( 4pcs )
08 : User manual ( 1pc )
What is "match"?
Match operation is to link the light and
remote into one same group, this
allows you to use one remote to control
multi solar lights without interfering
same floodlights within a short
distance.
The remote will control the solar flood
light if you do not do match operation.
HOW TO SOLVE
Push on the switch
Move light to sunshine place
Work again when sun comes
Clean solar panel
Adjust location
Work again when sun comes
Replace the battery in remote
Press the longer time button.
USER MANUAL
2-PRO
******The led light source is non-user replaceable******
4-PRO
6-PRO/8-PRO
MADE IN CHINA