Download Print this page

IronStrike AIF-INS-BLK Installation Instructions

Gas fireplace inserts kits use with ravenna and designer

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS FOR INSTALLING ARCH FACE AND INSET KITS
FOR USE wITH THE RAVENNA™ AND DESIGNER™ GAS FIREPLACE INSERTS
KIT CONTENTS (See Figure 1)
Please ensure that all these parts are in one of the two boxes.
1 ea. Face, Item #1 (large box)
1 ea. Insets (two insets in small box), Item #2
1 ea. Bolt Kit (includes 11 ea. 10-24 nuts, and 11 ea. #10 washers), Item #3
1 ea. Instruction Sheet
TOOLS NEEDED:
3/8" Nutdriver or Wrench
f i r e - p a r t s . c o m
Phillips Screwdriver
Item #2
Fig 1.
Item #1
Fig 2.
Item #2
Figure 1 - Arch Face Kit Contents
GENERAL INFORMATION
All of these parts may scratch and bend, great care should be used
in handling them.
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
ALL wARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED wITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
TURN OFF THE APPLIANCE AND ALLOw IT TO COMPLETELY COOL
BEFORE PROCEEDING.
Check the contents of the kits upon receipt and check for any damaged
or missing parts. If there is hidden damage, notify your freight company
or IHP dealer immediately.
P/N 900149-00
Rev. NC, 03/2014
Item #3
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
Be sure to clean plated surfaces with a soft cloth and household glass
cleaner prior to burning the appliance. Fingerprints left on plated
surfaces while burning may remain on the finish permanently.
Arched Face Kits
Cat. No.
Model
75374
AIF-INS-BLK
75375
AIF-INS-GOLD
75376
AIF-INS-BRNKL
75377
AIF-INS-BKNKL
Inset
Aspen™
Kits
Napa™
Cat. No.
Model
75306
AI30-ASPEN-BLK
75308
AI30-ASPEN-GOLD
75307
AI30-ASPEN-BRNKL
75309
AI30-ASPEN-BKNKL
75330
AI30-NAPA-BLK
75332
AI-NAPA-GOLD
75331
AI30-NAPA-BRNKL
75333
AI30-NAPA-BKNKL
75378
AI-PACIFIC-BLK
75379
AI-PACIFIC-GOLD
75380
AI-PACIFIC-BRNKL
75381
AI-PACIFIC-BKNKL
75298
AI30-TUSCAN-BLK
75300
AI30-TUSCAN-GOLD
75299
AI30-TUSCAN-BRNKL
75301
AI30-TUSCAN-BKNKL
HEARTH PRODUCTS
KITS AND ACCESSORIES
ARCH FACE AND INSET KITS
Description
Black Face
Gold Face
Brushed Nickel Face
Black Nickel Face
Pacific™
Tuscan™
Description
ASPEN Black
ASPEN Gold
ASPEN Brushed Nickel
ASPEN Black Nickel
NAPA Black
NAPA Gold
NAPA Brushed Nickel
NAPA Black Nickel
PACIFIC Black
PACIFIC Gold
PACIFIC Brushed Nickel
PACIFIC Black Nickel
TUSCAN Black
TUSCAN Gold
TUSCAN Brushed Nickel
TUSCAN Black Nickel
1

Advertisement

loading

Summary of Contents for IronStrike AIF-INS-BLK

  • Page 1 TOOLS NEEDED: 3/8” Nutdriver or Wrench f i r e - p a r t s . c o m Phillips Screwdriver Cat. No. Model Description 75374 AIF-INS-BLK Black Face 75375 AIF-INS-GOLD Gold Face Item #2 75376 AIF-INS-BRNKL Brushed Nickel Face...
  • Page 2 INSTALLATION INSTRUCTIONS Installation of the surround assembly is required prior to installing the Studs at Bottom of Face Arch Face and Inset Kits. For surround installation instructions, refer to the installation and operation manual provided with the fireplace insert. Step 1. Remove the face from the box (item #1 in Figure 1) and place the face down making sure that the side with the studs are fac- ing upwards.

This manual is also suitable for:

Aif-ins-goldAif-ins-brnklAif-ins-bknklAi30-aspen-blkAi30-aspen-goldAi30-aspen-brnkl ... Show all