Advertisement
Quick Links
Capacity
Power Source
Heating System
Fan Motor
Status Indicator System
Target Product Temperature
Ambient Operating Temperature
Outer Dimensions (H x W x D)
Net Weight/Shipping Weight
Classification
Degree of Protection From Electrical Shock
Degree of Protection Against Ingress of Water Ordinary
Mode of Operation
Storage Temperature
Relative Humidity
UL Standard
IEC Standard
CAN/CSA Standard
Characteristics
Fuse Type
SAVE THESE INSTRUCTIONS FOR PROPER USE OF YOUR WARMER
READ ALL SAFETY CAUTIONS AND OPERATING INSTRUCTIONS.
National Sanitation Foundation
International Standard
Y9891B
© Sage Products, Inc. 2003
TECHNICAL SPECIFICATIONS
#7944: 14 individual packages, one per slot
#7945: 28 individual packages, one per slot
115V, 60 Hz, single phase
115V AC
115V AC motor, permanently lubricated
5 watts, 625mA, 8V DC
125°F ±5°F (51.67°C ±2.75°C)
68 - 72°F (20 - 22°C)
#7944: 17.75" x 14.25" x 14.5" (45.085cm x 36.195cm x 36.83cm)
#7945: 17.75" x 27.75" x 14.5" (45.085cm x 70.485cm x 36.83cm)
#7944: Approx. 31 lbs. (14kg)/Approx. 37 lbs. (17kg)
#7945: Approx. 52 lbs. (24kg)/Approx. 59 lbs. (27kg)
Class I
Type B Applied Parts
Suitable for Continuous Operation
-22 - 150°F (-30 - 65°C)
50 - 70%
UL 2601-1 Medical Electrical Equipment
IEC 60601-1
CAN/CSA C22.2 No. 601.1
Powder coated steel exterior, aluminum interior, surfaces and shelves
8A, 250V
Attention: refer to accompanying documents
Protective earth ground terminal
Type B protection against electrical shock
Medical equipment with respect to electric
shock, fire and mechanical hazards only, in
accordance with UL 2601-1, CAN/CSA
C22.2 No. 601.1 and IEC 60601-1.
6ZA9
Advertisement
Summary of Contents for Sage Products Comfort 7944
- Page 1 READ ALL SAFETY CAUTIONS AND OPERATING INSTRUCTIONS. Medical equipment with respect to electric shock, fire and mechanical hazards only, in accordance with UL 2601-1, CAN/CSA National Sanitation Foundation C22.2 No. 601.1 and IEC 60601-1. International Standard 6ZA9 Y9891B © Sage Products, Inc. 2003...
- Page 2 ® Warmer Operating Instructions Model #7944 (14 count) • Model #7945 (28 count) For use with Comfort Personal Cleansing brand bathing, ® incontinence and hair care products only. Please read and understand these instructions completely prior to operating the Comfort Personal Cleansing ®...
-
Page 3: Important Safety Instructions
Sage Products for repair or adjustment. If there are external or user-serviceable fuses, check them and replace if necessary. If new fuses do not correct the condition, or if fuses continue to blow, contact Sage Products for repair or adjustment. - Page 4 STATUS INDICATOR DISPLAY SYSTEM Your new Comfort Personal Cleansing ® warmer is equipped with status indicators which are designed to provide information on the heating status of the packages in the unit. The status indicators allow you to know the difference between packages that have not been in the warmer long enough to reach the target temperature of 125°F (51.67°C) and those that have.
-
Page 5: Grounding Instructions
Unpack warmer, remove all packing material and examine the unit for any damage such as dents, broken door latches, etc. Notify Sage Products immediately if warmer is damaged. DO NOT install or operate if warmer is damaged. Remove Protective Plastic Film If a plastic film has been wrapped around the warmer to protect the painted finish from scratching during shipping, please remove this plastic film prior to using the warmer (however, not all warmers have plastic film wrapping). -
Page 6: Safety Precautions
3. The VOLTAGE used must be the same as specified on the warmer (115V). Using a higher voltage may result in a fire or other accident causing warmer damage. Using a lower voltage will cause slow heating. Sage Products is NOT responsible for damage resulting from the use of the warmer with other than specified voltage. - Page 7 Plug the warmer into the 115V power outlet and turn power switch to the “on” position. If warmer will not run, or does not run properly after replacing the fuse, call Sage Products for further direction. 6. Memory Backup: This warmer is equipped with a 5-minute memory backup. It provides backup power to the status indicator system for a short period of time in the event that the power switch is shut off, or power cord is removed from the wall outlet.
- Page 8 18. Equipment not suitable for use in the presence of a flammable anesthetic mixture with air, or with oxygen or nitrous oxide. 19. The Comfort Personal Cleansing Warmer uses circulated warm air. 20. The warmer should NOT be adjusted by anyone except properly qualified personnel. Contact Sage Products for authorized service. CARE OF YOUR WARMER 1.