Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for VIAIR 30031
- Page 1 30031 – TLC BOOST AIR SOURCE KIT 42041 – TLC BOOST XL AIR SOURCE KIT PN 30031 IMPORTANT: It is essential that you and any other operator of this product read and understand the contents of this manual before installing and using this product.
-
Page 2: Important Safety Instructions
TLC BOOST/BOOST XL AIR SOURCE KIT IMPORTANT SAFETY INSTRUCTIONS CAUTION - To reduce risk of electrical shock: - Do not disassemble or attempt to repair or modify unit while it is still connected to the vehicle. - Do not use this product in an area where it can fall or be pulled into water or other liquids. - Do not reach for this product if it has fallen into liquid. -
Page 3: Installation Instructions
TLC BOOST/BOOST XL AIR SOURCE KIT INSTALLATION INSTRUCTIONS CONNECTING TO THE BATTERY USING THE 2-PIN SAE TERMINAL RINGS The Terminal Rings allow you to mount the compressor permanently to a vehicle and also provide a more practical way of using it as a portable. Do not connect the Red Terminal Ring to any power source other than the Positive (+) Terminal of your vehicle’s battery. - Page 4 TLC BOOST/BOOST XL AIR SOURCE KIT Gauge Quick Connect Stud Quick Connect Coupler *Tolerance: ± 3% Inflation Trigger Bleeder Valve USING THE TLC TIRE INFLATOR 1. Connecting the TLC inflator: Select an inflation attachment and connect it to the TLC Inflator Quick-Connect Coupler. Then, connect the Inflator to an air hose by inserting the Quick-Connect Stud into the air hose coupler. 2. Inflating/Deflating Tires: To inflate, squeeze the Inflation Trigger by pressing it towards the handle of the inflator, this will allow air to flow into the tire. To deflate, press the Bleeder Valve located on the side of the body, this will release air from the tire. 3.
-
Page 5: Specifications
For frequent use in dusty environment, we recommend that you replace air filter element at least once a month. c. Regularly clean dust and dirt from compressor cooling fins and/or motor housing. d. Your air compressor is equipped with a permanently lubricated, maintenance-free motor. Never try to lubricate the compressor. e. All repairs should be performed by Manufacturer or Manufacturer’s Authorized Service Agencies only. f. For complete information regarding VIAIR Warranty, please visit: www.viaircorp.com/warranty SPECIFICATIONS 30031 – TLC BOOST AIR SOURCE KIT: (CE Certified) Tank Size: 1.5 gallon Motor Voltage: 12-Volts Max. Current Consumption:... - Page 6 TLC BOOST/BOOST XL AIR SOURCE KIT PERFORMANCE DATA TLC BOOST (PN 30031) 2.30 65.0 1.94 52.6 1.76 46.3 1.62 40.5 1.48 35.7 1.34 31.0 1.24 26.6 1.13 23.6 0.99 19.1 0.92 15.8 0.85 10.0 14.0 0.74 0.63 0.56 0.53 0.46 PERFORMANCE DATA TLC BOOST XL (PN 42041) 2.62 2.39 2.21 2.11 2.01...
-
Page 7: Troubleshooting Guide
TLC BOOST/BOOST XL AIR SOURCE KIT TROUBLESHOOTING GUIDE: PROBLEM: POSSIBLE CAUSE(S) CORRECTIVE ACTION Tank pressure drops when 1. Loose drain cock 1. Tighten drain cock compressor(s) shut off 2. Loose connections 2. Check all connections with soap and water solution and tighten Compressor runs 1. Excessive air usage 1. Decrease air usage continuously and air flow 2. Loose connections 2. Check all connections with lower than normal 3. Worn piston ring or inlet soap and water solution valve. - Page 8 ® VIAIR does not make any representations, warranties or guarantees, express or implied, as to the accuracy or completeness of ® the Manual. Users must be aware that updates and amendments will be made from time to time to the Manual. It is the user’s responsibility to determine whether there have been any such updates or amendments. Neither VIAIR nor any of its directors, officers, ® employees or agents shall be liable in contract, tort or in any other manner whatsoever to any person for any loss, damage, injury, liability, cost or expense of any nature, including without limitation incidental, special, direct or consequential damages arising out of or in connection with the use of the Manual. All third party product names, logos, and brands are property of their respective owners. All company, product service and trademark names are for identification purposes only. Use of these names, logos, and brands does not imply ownership or endorsement.