Stealth BBEUZ460 Quick Start Manual

Operational description:
To comply with FCC NPS (Network Protection Standard) requirements: NPS and other compliance/
safeguard features for AGC and anti-oscillation have been implemented. NPS and other compliance/
safeguard features are defaulted to be "On" (in operation). NPS and other compliance/safeguard features
can not be eld recon gured, disabled or removed. This Ampli er is not user programmable, does not need
ne tuning or adjustment, does not require professional installation. Most wireless providers consent to
the use of signal Ampli ers. Some providers may not consent to the use of this device on their network.
If you are unsure, contact your provider.
The antenna for the device has a 10 meter above ground maximum antenna height limitation when the
device is used with a handset that covers the 1710-1755 MHz band. Violation of this rule could be subject
to potential FCC enforcement action for noncompliance.
This device may be operated ONLY in a xed location for in-building use.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and
have your provider's consent.
Contact information for Ampli er registration:
Some providers have set up web-sites for Ampli er registration. If you don't see
your provider on this list, please contact your provider for information on how
to register your Ampli er.
AT&T: https://securec45.securewebsession.com/attsignalAmpli er.com/
Verizon: http://www.verizonwireless.com/solutions-and-services/accessories/
register-signal-Ampli er/
T-mobile: https://www.signalAmpli erregistration.com/
Sprint: https://www.sprint.com/legal/fcc_Ampli ers.html
Us Mobile: http://www.usMobile.com/usMobile/support/fcc-Ampli er-registration.jsp
WARNING. E911 location information may not be provided or may be inaccurate
for calls served by using this device.
For Inquires please contact Us
info@smoothtalker.com
1) Installation:
Connect the inside antenna and the outside antenna as shown in Fig. 1, Pg. 4.
2) Outside antenna:
a) Place outside antenna outside of the house in the area that has the best signal.
b) If outside location is unavailable, place the outdoor antenna on a window with
the best signal.
3) Inside Antenna: Connect the inside antenna as shown in Fig. 1, Pg. 4.
4) Separation: Increase the distance of the outside and inside antenna as much as
possible to maximize coverage and avoid gain reduction.
5) Power: Connect the power supply to the Ampli er and turn it on.
6) Coverage: Use your cell phone to determine if coverage is OK. If coverage is not
adequate, please look at the Green and Orange lights to determine if the
Ampli er has automatically turned down its gain per LED Gain Chart on Pg. 6.
If so pls try to separate or move antennas as per explantion on Pg. 5/6.
Important: Use only the power supply included with the Ampli er. Connecting any other power supply at any
time will result in damage to the Ampli er and will void the warranty. Do not turn on the power switch until
ALL cables have been screwed or plugged into the Ampli er or you can cause damage to the Ampli er.
Optional Dual Inside Antenna Installation (Fig. 2)
(Additional parts required which are not included in Ampli er kit
See page 2 for list of approved equipment )
1) Choose a splitter model for your needs. For 2 interior antennas use a 2 way 1) Choose a splitter model for your needs. For 2 interior antennas use a 2 way
splitter and for 3 interior antennas use a 3 way splitter etc... splitter and for 3 interior antennas use a 3 way splitter etc...
2) Mount the interior antennas in the areas which need Mobile coverage 2) Mount the interior antennas in the areas which need Mobile coverage
3) Evenly distribute the antennas throughout the oors and areas to cover 3) Evenly distribute the antennas throughout the oors and areas to cover
4) Turn on Ampli er unit and check signal strength improvement as needed 4) Turn on Ampli er unit and check signal strength improvement as needed
If you need help pls contact techsupport@smoothtalker.com and we will help If you need help pls contact techsupport@smoothtalker.com and we will help
you determine your cell tower location and get you setup. you determine your cell tower location and get you setup.
techsupport@smoothtalker.com
3 3
stealth
tech
®
Automatic power
control protects the
Mobile Network
Smoothtalker.com
Stealth Z4 4G LTE
High Power Building Amplifiers
Z460 Z465 Z472
User Manual
Mobile
60-70dB 4 Band
RX/TX
Signal Amplifier
MULTI BAND 60-70dB
High Power Building Amplifier
2G, 3G, 3G+, 4G, 4G+
GSM,HSPA,CDMA,LTE, LTE A
Band 1 2100MHz
Band 3 1800MHz
Band 8
900MHz
Band 20 800MHz
In 2001 SmoothTalker produced the rst digital mobile Mobile signal Ampli er
in North America with FCC and ICAN approval. We continue to lead with the
most powerful and intelligent Ampli ers in the world.
Our dynamic adaptive proprietary algorithms make them very network friendly.
We call it STEALTH TECH technology.
Typical Installation (Fig. 1 )
(All parts are included in Ampli er kit.)
Fig. 1
Optional Dual Inside Antenna Installation (Fig. 2 )
(Additional parts required which are not included in Ampli er kit.)
Fig. 2
4 Band
MULTI BAND
Building
60 -70dB
BBEUZ4 Series
model shown: BBEUZ460
stealth
tech
®
Smoothtalker.com
4