Summary of Contents for 3P Technik Twin Filter
- Page 1 3P Twin Filter Rainwater filter for bigger roof areas Operating and assembly instructions Item No. 1000650 Twin Filter Item No. 1000650 + 1000654 Twin Filter trafficable...
- Page 2 Operating and assembly instructions Twin Filter The 3P Twin filter can be installed in an underground chamber or outside in frost-free regions directly on the wall. The filter can be delivered to the construction site in the shaft in pre-assem- bled condition.
- Page 3 Twin Filter Twin Filter trafficable Installation in the pilot shaft: Standard concrete shafts with a diameter of Ø 1000 mm can be used. The openings for the supply and drain lines should be made using a core drill. In doing so, please observe the following points: 1.
- Page 4 Recommended Accessories: Wall bracket for Twinfilter for installation on the wall The wall mounting bracket for the Twin Filter* is required for wall installation. The brackets are fastened to the wall at the desired height (heavy duty steels). Push the filter rear side first into the recesses provided and fix using the enclosed washers and nuts.