Download Print this page
Jazwares Blippi RC Racecar Instruction Manual

Jazwares Blippi RC Racecar Instruction Manual

Advertisement

Quick Links

FCC ID for Vehicle: YNIJAZWARES139
FCC ID for Controller: YNIJAZWARES138
BATTERY WARNINGS:
1. Requires 3 x 1.5V AAA Batteries (RC Racecar) and 2 x 1.5V AAA Batteries (Remote Control
Handset) (Batteries not included).
2. Batteries are to be replaced by an adult.
3. Non-rechargeable batteries are not to be recharged.
4. Rechargeable batteries are to be removed from the toy before being charged.
5. Rechargeable batteries are only to be charged under adult supervision.
6. For best performance, only the recommended batteries or their equivalent are to be used.
7. Batteries must be inserted with correct polarity.
8. Do not mix new and used batteries.
9. Do not mix different types of batteries.
10. Exhausted batteries are to be removed from the toy.
11. The supply terminals are not to be short-circuited.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
WARNING! Changes or modifications not expressively approved by the manufacturer
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
HOW TO CLEAN THE RC RACECAR
• Clean with a damp cloth, use water only.
• Do not submerge in water.
• Do not use chemical or abrasive cleaners.
IMPORTANT:
Please save this instruction sheet.
It contains valuable product information.
Made in China. Manufactured and Distributed by:
Jazwares, LLC, Sunrise, FL 33326, USA
Jazwares, 16A Crane Grove, London, N7 8LE, United Kingdom
Jazwares GmbH, Mina-Rees-Str. 8, 64295 Darmstadt , Germany
www.jazwares.com / www.jazwares.de
Blippi™ Copyright © 2020 Moonbug Entertainment. All Rights Reserved.
BLP0139
INCLUDES:
Remote Control Handset
A
RC Racecar
B
Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.
NEVER sit or stand on any parts of the RC Racecar or accessories.
NEVER drop or throw the RC Racecar or accessories.
NEVER expose the RC Racecar to moisture of any kind.
The RC Racecar
INSTRUCTION MANUAL
Congratulations on your purchase of the RC Racecar.
Please read all information in this guide thoroughly for usage instructions.
AGES
3
+

Advertisement

loading

Summary of Contents for Jazwares Blippi RC Racecar

  • Page 1 Made in China. Manufactured and Distributed by: Jazwares, LLC, Sunrise, FL 33326, USA Protect the environment by not Jazwares, 16A Crane Grove, London, N7 8LE, United Kingdom disposing of this product with Jazwares GmbH, Mina-Rees-Str. 8, 64295 Darmstadt , Germany household waste (2012/19/EU).
  • Page 2 INSTRUCTIONS Bottom of Remote Control Handset 1. How to Replace Batteries (Batteries Not Included) 1.5V ADULT INSTALLATION REQUIRED. • Ensure both RC Racecar and Remote Control Handset unit is in the “OFF” position. • Use a Phillips Head screwdriver (not included) to loosen screws in battery compartment cover (screw remains attached to cover).

This manual is also suitable for:

Blp0139