BRINKS BC4007 Installation Instructions

BEFORE STARTING THE INSTALLATION
1. PARTS AND ASSEMBLY DIAGRAM
Tools needed for installation: hammer, Phillips head screwdriver, punch, electric drill, tape, #12-24 tap for metal doors and jambs.
Check that all parts shown in the parts list and in the illustration are present. Match screw size and type to hardware drawing.
8
9
4
5
10
2. LOCATION OF CLOSER ON THE DOOR
Determine whether the door is left or right hand using the following illustrations. Remember that the CLOSER is always mounted inside the building near the hinge
edge of the door.
2A. INWARD OPENING DOOR
This illustration shows the mounting for inward opening doors, as seen from
inside the building.
(RIGHT HAND DOOR)
3-4. INSTALLATION PROCEDURE
3A. POSITIONING TEMPLATE
Templates to help position the CLOSER correctly are provided on an enclosed sheet, BE SURE TO USE CORRECT TEMPLATE. Decide the maximum opening angle
for the door (120° or 155°) before cutting out the template. The template must be cut differently for each angle.
50 Icon, Foothill Ranch, CA 92610-3000 USA
1-800-562-5625
Compare the requirements of the installation with the speci cations
below, to make sure the correct model of CLOSER will be installed.
Type
Closer Size
Maximum Door Width
Maximum Door Weight
Maximum opening angle for closer
(mounted on door or top jamb)
3
11
12
1
6
7
2
(LEFT HAND DOOR)
For Customer Care call: Toll Free 800-562-5625 or info@hamptonproducts.com
INSTALLATION INSTRUCTIONS FOR MODELS
BC4007, BC4008, BC4013 & BC4014
UL 3 Hr Fire Rated
3
38"
125 lbs
120˚ or 155°
Ref No. Name of Parts
Closer Body
1
2 Main Arm
Forearm and Arm Shoe
3
4 Forearm Connecting Screw & Lockwasher
5
Forearm Connecting Washer
6
Oval Head Sheet Metal Screw, #12 X 1-1/2"
7 Oval Head Machine Screw, 12-24 X 3/4"
8 Truss Head Sheet Metal Screw, #12 X 1-1/4"
9 Truss Head Machine Screw, 12-24 X 3/4"
10 Closer Body Cover
11 Main Arm Connecting Screw & Lockwasher
12 Main Arm Flat Washer
FOR WOOD OR METAL
For Closer Body
( 6 )
( 8 )
2B. OUTWARD OPENING DOOR
This illustration shows the mounting for outward opening doors, as seen from
inside the building.
(RIGHT HAND DOOR)
999-30006
DOOR CLOSER
Qty.
1
1
1
1
1
4
4
2
2
1
1
1
FOR METAL ONLY
( 7 )
For Arm Shoe
( 9 )
(LEFT HAND DOOR)
©2021 Hampton Products International Corp.
999-30006_Eng REVD 01/21