Advertisement
Quick Links
PRODUCT NAME: Tilda Charging Task Lamp
ITEM NUMBER: LK001
ASSEMBLED DIMENSIONS: 23.2"H x 10"W x 15.5"D
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp rated up to 100 Watt MAX Type A bulb (not included). LED recommended.
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulbs to cool prior to
replacement.
-Do not touch or look directly at illuminated bulbs.
-Keep flammable material away from illuminated bulbs.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10-27-2021
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA
Page 1 of 3
Advertisement
Summary of Contents for Ballard Designs Tilda
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Tilda Charging Task Lamp ITEM NUMBER: LK001 ASSEMBLED DIMENSIONS: 23.2”H x 10”W x 15.5”D IMPORTANT SAFETY INSTRUCTIONS: -This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
- Page 2 Unplug lamp prior to installation or removal. Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level surface. NOTE: To avoid accidentally discarding small parts or hardware, retain all carton contents until after assembly and installation are complete.
- Page 3 Unplug lamp prior to installation or removal. LAMP FUNCTION AND BULB INSTALLATION Adjust Lamp (A) as needed by rotating at swivel joint as illustrated. Socket on Lamp is rated up to a 100 Watt MAXIMUM Type A (medium base) Bulb (not included). An LED bulb is recommended which permits a bright- er bulb without exceeding the socket rating.