Revision Record Issue Date Remarks Aug 2009 First issue...
Page 3
This kit provides an optional Magnetic Stripe Reader (MSR) that installs on the side of the USB 5954 DynaKey. 26933 There are four versions: Kit No. Description 5954-K121 JIS (Beige, G11) 5954-K122 JIS (Charcoal, CG1) 5954-K123 3-Track ISO (Beige, G11)
Installation Procedures Caution: Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges. 1.
Page 5
4. Remove the MSR Filler Blank (2 screws). MSR Filler Blank 26929 5. Insert the MSR Cable into the cabinet 6. Connect the MSR I/F Cable and the MSR Ground Cable to the 5954. MSR I/F Cable MSR Grounding Cable 26930...
Page 6
7. Install the MSR and secure it with screws (2). MSR Screws 23818 26927 8. Replace the Access Cover. Align the tabs on the bottom of the Access Cover with the extensions in the 5954 cabinet and bump the cover into position as shown. 23818 Access Cover 26932...