HKTS 30SAT-2, hookup is simple. Color-coded cables make the HKTS 30SAT-2 easy to use. To obtain maximum enjoyment from your new speaker system, we urge you to take a few minutes to read through this manual. It will help ensure that the connections you make to your receiver or amplifier are correct.
System: Your HKTS 30SAT-2 speakers are designed to expand an exist- ing HKTS 30 speaker system from 5.1 channels to 7.1 channels. You can connect the HKTS 30SAT-2 speakers to your receiver’s or amplifier’s surround back left and surround back right outputs.
Page 4
9. Slide the speaker portion of the wall-mount bracket onto the speaker, as shown in the illustration. Fit the wall-mount bracket’s grooves onto the rails in the speaker, and apply even pressure on both sides of the wall- mount bracket so it slides straight onto the speaker.
It is very important to connect each speaker identically: ( + ) on the speaker to ( + ) on the receiver or amplifier, and ( – ) on the speaker to ( – ) on the receiver or amplifier. Miswiring one or more speakers results in thin sound, weak bass and a poor stereo image.
Page 6
Receiver RIGHT LEFT Surround Back Left Speaker Cable (Brown Bands) – Surround Back Left Surround Back – – Surround Back Right Speaker Cable (Tan Bands) – Surround Back Right...
• Make sure that all wires and connections between the receiver/amplifier and the speakers are connected properly. • Make sure that none of the speaker wires is frayed, cut or punctured. • Review the proper operation of your receiver/amplifier. If there is no sound coming from one speaker: •...