Savanah
*
Description
This is a tough white moulded plastic stool type seat with
advanced sucker design for maximum security in water.
The seat has holes for drainage and a partial cutaway for
easier personal cleansing. The seat is contoured for comfort
and is available in two heights (6" or 8"). It can be purchased
as a fixed height assembled product or in a kit form to give
either height.
Installation and Adjustment
1. The fixed 6" and 8" units are already assembled and are
not adjustable (see fig 1).
2. To assemble the 6" and 8" kit (see figs 1, 2 & 3), initially
assemble all four legs as shown in fig 2 & 3 either with or
without leg extensions (H). To do this, use four sets of all
components B through to H (shown in fig 2 & 3) and
tighten to finger tightness.
Max user weight
190
kg
Homecraft AbilityOne
Shelley Close, Lowmoor Business Park,
Kirkby-in-Ashfield,
Nottinghamshire, NG17 7ET, UK
Telephone: +44 (0)1623 754047 Facsimile: +44 (0)1623 755585
PART NO. 70106
Issue 5
© AbilityOne Homecraft Ltd. 2003
Bath Seat
Fig.1
30
stone
F
F
H
D
G
Fig.3
Homecraft AbilityOne
PRODUCT INFORMATION SHEET
Ensure that no soap, oil or dirt is present, particularly on
the expanding bung (E) and the inside of the seat legs (A).
Insert the leg assemblies into the seat and tighten firmly
with a screw driver.
Specification
- Made from polypropylene
- Seat size: 400 x 240mm (15
- Seat heights: Low 150mm (6")
Cleaning and Care
Wipe over with a damp cloth and a solution of detergent.
Codes
AA1110Y Savanah
AA1112 Savanah
AA1114Y 150/200mm Kit
F
E
C
B
Fig.2
3
/
x 9
4
High 200mm (8")
*
Bath Seat - Low
*
Bath Seat - High
A
D
C
Sammons Preston Roylan
Telephone: 1-630-226-0000 Telefax: 1-630-226-1390
1
/
")
2
4 Sammons Court,
Bolingbrook,
IL 60440-4989, USA