TEREN DP17 Operation Manual

DP17 Flush Mount DP Display Unit/Transmitter-Operation Manual
DP17 Flush Mount DP Display Unit/Transmitter
Applications& Features
Designed for flush mount, measure and display environment

differential pressure such as cleanrooms in electronics or
pharmaceutical plants, hospital and various laboratories,
etc.
316L front panel, PMMA window, flat surface, no dust stays,

good for all detergents, sanitizers and bactericides
Strong EMI capability, compatible with the EMI requirements

of EN61326-1 for industrial equipment
Large LCD

High performance sensor, 100% interchangeable sensor

without re-calibration,1 channel 4~20mA output
Compatible to any DDC/PLC/SCADA or other data collect

and control systems
Specifications
Different pressure sensor:
DP
Accuracy
Range 0~60/0-125 etc.
Long term drift
Response time
<0.05%FS/° C(Zero) <0.08%FS/° C(FS)
Thermal effect
Temp. comp.
Medium Temp.
10xFS(
Work Press.
Display: 4 bits LCD (with backlight), display area 47x27mm,
with word H 16mm and unit H 2mm
Measuring Ranges
Code
0
1
2
3
4
5
1. Set the 5 engineering units by button keys and the related LCD indicator will be on.
2. For zero center models, add "Z" at the end of the model. Only ranges 1~5 have this selection.
For example, DP171**Z, means the range is -30-0-30Pa.
.
DP17
1%FS（2%FS@0-25Pa）
see range table
<0.5%FS/Year
0.5/1/5/10（settable）
0~50° C
0~60° C
overload burst
)，20xFS( )
UNIT & Range & Display Resolution
Pa
0-25 25.00
0-60 60.00
0-125 125.0
0-250 250.0
0-500
500.0
0-1000 1000
Display panel material: PMMA
Resolution:
0.1Pa(or 0.001 in wc/mbar, 0.01mm wc etc., switchable)
Update time: <1s
Power Supply: 16~28VAC/19~35VDC
Consumption: < 1 VA
Analog outputs:1×4~20mA(3/4 wires),
and reverse polarity protection; accuracy as low as
0.3%FS(1.0%FS accuracy)
Process connection: Built-in DP sensor: 2 conical nozzles
Zero set: zero button / key
Terminals: max Ø1.5mm
Work Environment: 0~50° C, 0~95%RH (no cond.)
Storage Environment: -10~70° C
Front panel material: 316L stainless steel, 1.5mm thick
Back housing parts: fire retardant ABS+PC(UL94V-0)
Protection: front panel IP65
Weight: about 385g
Approval: CE, meet EN61326-1 for industrial equipment
Models
DP17
Model
DP17M
Range
Panel
Port
Screw
Hole
Pa kPa in w.c.
0.025 0.100
0.060 0.250
0.125 0.500
0.250 1.000
0.500 2.000
1.000 4.000
<500Ω
R
L
on back, Ø 5 mm tube connection
2
Flush Mount DP Display Unit/Transmitter
X
Range selection
0 N/A
1
1 pressure sampling screw on front panel
0 N/A
1 4 holes at corners, with SS screws
mm w.c. mbar
2.500 0.250
6.000 0.600
12.00 1.250
25.00 2.500
50.00 5.000
100.0 10.00
Edition:A/1
; over voltage
1