Page 1
HOME- HOME- HEAT EXCHANGER GHOST BASE ACTIVE WIRELESS IT - MANUALE D’USO DEL TELECOMANDO EN - REMOTE CONTROL USE MANUAL...
Page 2
INIZIALIZZAZIONE PRODOTTO Per iniziare ad utilizzare il telecomando si prega di inserire due pile CR2032 3V. GLOSSARIO TASTI Tasto di sblocco Selezione velocità manuale Selezione soglia di umidità relativa Selezione modalità principali Selezione modalità notte Selezione modalità espulsione temporizzata Selezione modalità flussi d’aria Reset allarme filtro ISTRUZIONI D’USO Per selezionare una delle funzioni premere l’apposito tasto.
Page 3
FISSAGGIO A MURO PORTA TELECOMANDO Fissare il porta telecomando al muro come illustrato di seguito. SOSTITUZIONE BATTERIA TELECOMANDO In caso il prodotto non risponda più ai comandi inviati dal telecomando o il display risulti spento è necessario sostituire le batterie come illustrato di seguito. Il modello di batterie da utilizzare è...
Page 4
To unlock the buttons press the button (S) placed in the upper part of the remote control. For the explanation of all the operating modes refer to the INSTALLATION, USE AND MANTEINANCE MANUAL of HOME-VMC unit, HG60 S | RC | RCW version.
WALL MOUNTED HOLDER FOR REMOTE CONTROL Fix the remote control holder to the wall as shown in the picture here below. BATTERY REPLACEMENT If the product no longer responds to the commands sent by the remote control or the display is turned OFF replace the batteries as shown below.