Advertisement
Quick Links
TYRE INFLATOR
DIGITAL - TDR3000
OPERATING INSTRUCTIONS
PRODUCT NO.
10.3012 - 500 mm Hose - Hold On Dual Angle Chuck - Tyre Inflator Digital - TDR3000
10.3012OS - 500 mm Hose - Hold On Dual Angle Chuck - Tyre Inflator Digital - TDR3000
10.3012OS2 - 2700 mm Hose - Clip On Dual Angle Chuck - Tyre Inflator Digital - TDR3000
10.3012OS3 - 1800 mm Hose - Clip On Single Angle Chuck - Tyre Inflator Digital - TDR3000
COMPLIES WITH
EN12645: 2014*
Advertisement
Related Manuals for JAMEC PEM TDR3000
Summary of Contents for JAMEC PEM TDR3000
- Page 1 OPERATING INSTRUCTIONS PRODUCT NO. 10.3012 - 500 mm Hose - Hold On Dual Angle Chuck - Tyre Inflator Digital - TDR3000 10.3012OS - 500 mm Hose - Hold On Dual Angle Chuck - Tyre Inflator Digital - TDR3000 COMPLIES WITH 10.3012OS2 - 2700 mm Hose - Clip On Dual Angle Chuck - Tyre Inflator Digital - TDR3000...
- Page 2 ‘light’ oil into the gauge mechanism. IMPORTANT The Jamec Pem TDR Digital Tyre Inflator represent quality and guaranteed accuracy. The classic handheld, slimline design is easy to hold and is This tyre inflator must only be connected to air line systems which have designed to last in rugged workshop environments.
- Page 3 BATTERY CHANGE This inflator requires 2 x AAA batteries. If the voltage of the batteries fall below 2.6 volts, the battery icon will flash continuously until it shuts down. If the voltage of the batteries fall below 2.5 volts, the low “LO” battery icon appears while the power is on and then shuts down automatically.
- Page 4 CALIBRATION CERTIFICATE This Tyre Inflator Part Number: 10.3012, 10.30123OS, 10.3012OS2, 10.3012OS3 has been calibrated in its normal working position on test equipment with an accuracy that is traceable to standards according to: EN12645: 2014 Serial Number: Date: ALLOWABLE TOLERANCE ± 1.2 Up to and including 58 psi ±...