Page 1
Professional Power Amplifier Owner's Manual for model: Q3 /Q7/ Q10/ B8...
Page 2
SAFETY INSTRUCTIONS AND ADVICE Warning! Please read this user manual fully before using this product, and make sure you follow all the instructions, and heed all warnings. the correct earth/ground pin. Check also the outlet has a Unpack the carton and check the contents to ensure all parts suitable current rating for the equipment.
1. Introduction Thank you for your purchase of the Series Power Amplifier. These series amplifiers fully incorporate renown technological expertise, and offer high reliability, rock-solid stability, and superb acoustic characteristics—all in a trim, 1U-sized package. Features: Modular design, each channel is fully separate and without any interference to other channels. Each module is individually fused and has •...
Page 4
1-3 System Connection – four separate channels to four sets of speakers In standard operating mode, you can connect 4 different audio sources, one to each channel (A,B,C or D). Connect speakers to each output channel (A,B,C,D) Use either 2 core cable connected to pin1+ and pin 1- , or 4 core cable where pin2+ and pin 2- are NOT CONNECTED at the speaker end.
Page 5
1-4 System Connection – bi-amp configuration with 4 core cable Amplifiers are pre-wired with the output for channel B on pin2+/- of channel A output, and also the output from channel D to pin2+/- of channel C output. This is to allow bi-amp configuration without the need of a separate patch panel. Four core speaker cable must be used, and the LF signal applied to input A, and the HF signal applied to input B.
2. Operating Instructions 2-3 Troubleshooting: 2-1 Start-up procedure. Indicator(s) Possible cause 1. No power – check there is power, Check all inputs and outputs are connected correctly as per and the power light is on. the above instructions, paying particular attention to the bi- 2.