Summary of Contents for Living Spaces Freemotion LS2500
- Page 1 Cordless Rechargeable BATTERY PACK For Reclining Furniture By Living Spaces Go Cord-Free Owner’s Manual LS2500 Rechargeable Battery Pack LS5000 Rechargeable Battery Pack LS7500 Rechargeable Battery Pack...
- Page 2 Many USB ports draw power even when not in use, requiring frequent charging of your battery. b. Ask Living Spaces for more information on the type of USB your furniture is equipped with. 4. If your furniture is equipped with an on/off USB switch, and you are not continuously plugged into an outlet, it is recommended that you keep USB off at all times.
-
Page 3: Charging Instructions
Charging Instructions Normal charging procedure (Scenarios A and B) 1. Press the Yellow power indicator button to display estimated remaining power when battery is not plugged into charger. 2. Connect charger to battery pack. Only use charger provided. 3. Connect the AC power cord to charger, then plug AC power cord into electrical outlet. 4. -
Page 4: Installation Instructions
Installation Instructions Scenario A (floor install without PB bracket) Battery pack sits on floor underneath reclining mechanism and attaches to motor cable underneath recliner. When connecting multiple independent recliners, please refer to additional instructions included in your purchase of Y1, Y2 or Y3 cables. Scenario B (installation behind backflap with purchase of PB bracket) (Option #1) Battery pack is mounted behind the backflap of recliner using option PB bracket (Please refer to PB bracket installation instructions). - Page 5 Other Important Information 1. Should your battery remain unused for an extended period, it may require several charging cycles before reaching peak performance. 2. Fully charged and unused mobile power sources are recommended to be recharged every 6 months. The storage temperature should remain between 32-100 degrees Fahrenheit (0-38 ℃ ). Absolute humidity should remain between 45%-85%.
-
Page 6: Troubleshooting
Troubleshooting 1. For your safety, battery pack includes short circuit and overload protection systems. Should the system experience either a short circuit or overload situation, power will be cut automatically. Unplug the battery pack from motor, wait 3 minutes, then fully charge battery pack before reconnecting to motor.