Related Manuals for Britec MOSCU
Summary of Contents for Britec MOSCU
- Page 1 Electric Patio Heater Mod. MOSCU (SEH02) Assembly and operation instruction Please keep the manual for future reference.
-
Page 2: Safety Information
Dear customer, Congratulations on your purchase of our electrical patio heater. You have chosen a superb quality product, which you will enjoy very much. Your product is carefully designed and manufactured from the best materials. In this manual you will find the main features of the product you purchased, useful maintenance advice and practical tips. SAFETY INFORMATION Only use the heater on a firm solid horizontal area where all the feet on the base are in contact with the floor. - Page 3 ASSEMBLY Step1: Insert 4pcs M6 nut onto the backside of base. Align bottom pole with the base, then insert 4pcs M6x30 screw and fully tighten them. Lastly place Deco ring onto the base. STEP 1 Step 2: While holding power cord, screw middle tube onto bottom tube and screw top tube with middle tube, tighten all tubes properly.
- Page 4 Step 3: Connect plug with cable socket, and secure it with plastic lock. Then lock heater head with top tube using 2pcs M3x8 screw. STEP 3 Step 4: Pull power cord from under the base and lock it inside the groove under the base with plastic pin and 2pcs 3.5x13 screw.
-
Page 5: Operation
OPERATION Place this unit on a firm, level surface and plug into a grounded 230/50Hz power outlet. Only operate this heater when it is in upright position and the base is attached. This unit is equipped with two switches for 3 settings. Left: 800W Right:1200W CARE AND MAINTENANCE...