Advertisement
Quick Links
Please ensure you have the kit in your possession before commencing any form of installation
Please read our instructions carefully before commencing any installation to ensure safe and satisfactory operation of this product
This item is not like a pre-assembled Christmas light set, and WILL NOT automatically work once plugged in straight out of the box
Before installation please visually check all components including plug, cable, driver and heads for damage
A
Position cables away from areas where they may be at risk from being cut, trapped or damaged
If your model has a plug-in driver, please ensure that it is situated indoors (e.g. house, garage, shed) to protect it from the elements
DO NOT ADD MORE HEADS. This kit is not designed to power an increased number of heads
B
C
INTRODUCTION
Thank you for purchasing this item
If any part looks damaged, the product should not be installed or used
KEEP THESE INSTRUCTIONS FOR FUTURE USE
INSTALLATION INSTRUCTIONS
Plan your layout carefully
Ensure cables reach between driver and each head
Avoid locating cables in positions that would cause a trip hazard
Ensure the cables and connectors are accessible for future maintenance
Secure any excess cable neatly using insulated staples or plastic ties
You can use less than the maximum lamps as required
Please ensure you use the correct cutter type for the mounting surface
est rill
Take care not to damage any pipes or cables beneath the mounting surface
67
ip
A drill bit is required to install this kit
Ensure you use the correct cutter size
hole in
s
re iece of woo to confir
Drill holes for heads
LED head type
15mm diameter
20mm diameter
30mm diameter
30mm square
45mm diameter
60mm diameter
Connect LED heads in strict order sequence
from closest to plug to the furthest away
Feed cables for each head through drilled holes
Push head fully into drilled hole to secure
nsure he
is full
ENSURE ARROWS ON CONNECTORS LINE UP
ENSURE CONNECTORS ARE FIRMLY PUSHED TOGETHER
www.firstchoicelighting.co.uk
info@firstchoicelighting.co.uk
he
fits securel
Cutter size
12mm diameter
17mm diameter
24mm diameter
24mm diameter
32mm diameter
45mm diameter
ush with
ounting surf ce
Page 1
Advertisement
Summary of Contents for First Choice 55820
- Page 1 www.firstchoicelighting.co.uk info@firstchoicelighting.co.uk INTRODUCTION Thank you for purchasing this item Please ensure you have the kit in your possession before commencing any form of installation Please read our instructions carefully before commencing any installation to ensure safe and satisfactory operation of this product This item is not like a pre-assembled Christmas light set, and WILL NOT automatically work once plugged in straight out of the box Before installation please visually check all components including plug, cable, driver and heads for damage If any part looks damaged, the product should not be installed or used...
-
Page 2: Care And Maintenance
Check with your local authority for recycling advice ACCESSORIES 55820 IN-LINE PHOTOCELL When installed between the power lead and first LED head, the in-line photocell (alternatively known as a dusk ‘til dawn sensor) will turn the kit on when it starts to get dark and off again when it starts to get light. 30 Lux on, 30 Lux off Install between the included 5m extension lead and first LED head, in an unobstructed position (in direct sunlight is not necessary) This accessory can only be used with warm white, cool white or blue kits. -
Page 3: Troubleshooting
www.firstchoicelighting.co.uk info@firstchoicelighting.co.uk TROUBLE SHOOTING It is highly unusual to have faulty LED lamps and issues with installing and using these kits On those rare occasions, please use these instructions, and be patient! All LED kit connections LED Heads that do not light up? Turn off power and unplug Check product for any visible signs of broken or damaged parts - plug, driver, cables, connectors, receiver or LED heads Starting at the plug lead connector and working through the complete kit, unplug each connector... -
Page 4: Frequently Asked Questions
www.firstchoicelighting.co.uk info@firstchoicelighting.co.uk FREQUENTLY ASKED QUESTIONS My lights are not coming on ? This item is not like a pre-assembled Christmas light set, and WILL NOT automatically work once plugged in straight out of the box Please read our instructions carefully before commencing installation LED heads are not lighting up ? If the power to the plug socket is on, then this is likely to be a connector issue. - Page 5 www.firstchoicelighting.co.uk info@firstchoicelighting.co.uk IP67 KIT - SET OF 20 - 45MM - COOL WHITE 20 X .5W (COOL WHITE) INTEGRATED LED FCL-55816 20cm 32MM DIA CUTTING HOLE REQUIRED 35MM MINIMUM CAVITY DEPTH REQUIRED INDOOR OUTDOOR CONNECTION DETAIL IF COMBINED WITH OUR SPLITTER CABLE ACCESSORY INSTEAD OF THE 5m EXTENSION LEAD, 2 X SENSORS WILL BE REQUIRED, ONE FOR EACH SPLIT SET OF LIGHTS 500cm 95cm...