Related Manuals for Adexa K-606F/1380
Summary of Contents for Adexa K-606F/1380
- Page 1 Operating instructions Vacuum cleaner Type: K-606F/1380 K-606F/1600 IP24 MADE IN CHINA...
-
Page 2: Table Of Contents
Congratulations on the purchase of this high-quality product. Please read this operating instruction attentively, before you take the appliance in operation. It gives important notes for security, the use and maintenance of the appliance. If you have further questions, please contact our customer service. Contents: •... -
Page 3: Appliance Figure
Appliance figure: Switch button Handle Push stroke Outlet Wire hook Top cover Hook Inlet Water drain plug Tank Blowdown pipe Base Small wheel wheel (Optional) -
Page 4: Important Safety Instructions
Important safety instructions: If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. This appliance is not intended for use by persons (including children)with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 5: Assembly
Do not use the mains wire to carry the appliance. Do not pull the mains wire over sharp edges. Assembly: Push stroke: Insert the push stroke is fixed inside the hole. HEPA filter: Put the HEPA filter in the machine head carefully. Fixed cover clockwise twist in place. -
Page 6: Cleaning And Maintenance
Unwind the power cord. Plug the appliance and switch on. Unplug the appliance after use Cleaning and maintenance: Drain off water. Open the dust container. Fixed cover counterclockwise unscrew. Take out the HEPA filter. Clean the HEPA Filter by knocking off the ash. Wash off the HEPA Filter with cleaning water. -
Page 7: Error Detection
Error detection: Before you contact our service center, please check the following: Problem Possible reason Advice Motor does not start -Power cord not firmly -Plug unit firmly. plugged into outlet. -Check the Outlet. -Outlet damaged. -Switch on the appliance -Cleaner not switched on. Suction power is -Unit clogged -Remove the blockage.