Advertisement
Quick Links
Advertisement
Related Manuals for Uface 5 Lite
Summary of Contents for Uface 5 Lite
- Page 1 PRODUCT BOOKLET Uface 5 Lite ( OS-A6CC1 )
-
Page 2: Installation
Dear customer, 1 / 2 Platform/Software Operating Instruction Thank you for using our product. For better use, please carefully read this instruction. If you have any The software carried by the product divides into 2 versions: GS (WO platform, provides the secondary issues not mentioned here, please contact the provider. -
Page 3: Illumination Intensity
3 / 4 Illumination intensity Position Device shall be installed in places avoiding backlight, side-light and strong light. Illumination intensity in actual scenarios The recognized face, of which, the illumination intensity （“intensity” in short) shall not be lower This place, 3m away from the window, or does not Device Person Light... - Page 4 5 / 6 Steps Paste the installation sticker horizontally on the wall. According to the on-site position, Connect the tail lines with the host, move the device to up-down align the bracket slot. Use choose suitable place for drilling. For narrow edge, choose upper and lower installation. Wall-mounting sticker Outlet hole 1.4M...
-
Page 5: Wiring Connection
Wiring connection 7 / 8 Wiring for magnetic door Wiring for automatic door Installation notes 1. When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such Magnetic lock Auto-door controller Sensor (inside) -
Page 6: Warranty Description
9 /10 Features Warranty description Dear customer, Thank you for purchasing and using this product. To better guarantee your satisfaction, please carefully • Try to restart and reset • Characteristics read this warranty clauses after purchase. When the device stops in some interface for a 1. - Page 7 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.